| From | Message |
Seth
Dodge Dakota
JOIN HERE
2/18/2004
19:30:01
|
 Subject: Lift Info needed!
IP: Logged
Message:
Hey I have a queston to ask you guys.
I have a '93 dakota V6 4x4 all stock and I want a lift on it. How high should I go, what tires to run, and what will the cost be for the Mods. Im all new to this so any other info that I might need please fill me in.
-thanx-
|
DakotaGuy
Dodge Dakota
JOIN HERE
2/18/2004
20:29:19
|  RE: Lift Info needed!
IP: Logged
Message:
how depends on you......You need to decide what size tires you want to run then that will dicate your lift size.
|
92Dakota4x4
GenII
2/18/2004
22:58:09
| RE: Lift Info needed!
IP: Logged
Message:
Use the search feature here, look for the trailmaster 4" and check out my website for info. But be prepared to spend $$$$$$
|
brandon
Dodge Dakota
JOIN HERE
2/26/2004
20:15:57
| RE: Lift Info needed!
IP: Logged
Message:
the most cost effective way would be to get a 3"
body lift, 15" wheels from a ford explorer or ranger, why because it helps with the rubbing on the inner fender. and a set of 33x12.50 general grabbers like 120 a piece best off road tire u can buy for the price.
i have an 87 with this setup, the front torsion bars are cranked i have made some spacers for the upper control arm because cranking up the torsion bars caused premature upper ball joint failure. to do this i had to cut off my bumpstop braket and replaced the overtravel limit with a piece if cable to keep the halfshafts for binding. if u need me 2 make some spacers or need some pictures e-mail me. it works good
|
krbdog
Dodge Dakota
JOIN HERE
2/28/2004
13:02:25
| RE: Lift Info needed!
IP: Logged
Message:
i have 93 4x4 ext cab w/5.2 that i cranked up the torsion bars.but i want more from them so im gona buy bigger torsion bars but worry about algnment prob's.can u email with ur info for ur spacers??? krbdog@hotmail.com
|
92Dakota4x4
GenII
2/29/2004
01:09:31
| RE: Lift Info needed!
IP: Logged
Message:
Those Ford wheels will not fit on 91 and newer Dakotas-They have 6 lug wheels.......
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
