Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
08:18:29 - 11/17/2024

Off Road
FromMessage
Kory
Dodge Dakota
JOIN HERE
 Email

12/07/2003
22:39:30

Subject: Snorkel/intake
IP: Logged

Message:
The other week I went mudding through some fairly deep puddles. At one point I think I took some water through the intake (stock airbox, K&N, smorkel removed). Engine spuddered and threatened to die if left in idle and power was non-existent. Drove around a little while in 1st gear and 3,000 RPM and problem went away after about 5 minutes.

My question is, has anybody ever tried to install a hummer or jeep-type snorkel on their Dakota? Has anybody ever cut a hole in the hood and did some bodywork to put a cowl on and seal it to an airpan to suck air from the windshield? I think either would solve my water ingestion problem. I would put the snorkel back on the airbox, but it would only add to the problem since I have the glassworks fenders and water readily splashes up to where the snorkel goes.

Any advice would be appreciated. I'm pretty competent with my tools and like to experiment when I have time, but don't have a lot of cash to blow.

Been back in the mud a few times since with no problems, but I'd rather not let this problem happen again.
Thanks in advance!
~Kory




oyotaco
Dodge Dakota
JOIN HERE
 Email

12/08/2003
11:36:19

RE: Snorkel/intake
IP: Logged

Message:
hey kory, i feel your pain. i havent sputtered yet, but i have been through a few creeks, and mud holes that have scared me. i have not put my plan into action, but my thought was to run a piece of pvc (i know its crappy) behind the fender and such, back to the windshield pillar. i have been trying to find a ARB safari snorkel, that i could then run up the windshield to look ok. i dont really want pvc running up my A pillar. just my thoughts.



Dirty Durango
Dodge Dakota
JOIN HERE
 Email

12/08/2003
18:31:43

RE: Snorkel/intake
IP: Logged

Message:
Unfortuntly I know exactly what you have gone through I've locked up two different motors in my 98 Durango. Only thought that I can give you is to look at a Toyota Tacoma or a 4-Runner snorkel kit dependig on witch side you want it on. Or you could be like me and ordered one of each, I also have bought one of those intakes that has a round filter and two inlets one on each side. Only thing I have found is trying to figure out how to hook it all up.



oyotaco
Dodge Dakota
JOIN HERE
 Email

12/10/2003
14:19:24

RE: Snorkel/intake
IP: Logged

Message:
i found some sites that have ARB Safari Snorkel parts, to at least finish off a "rig" job. On ebay there is a listing for a fairly cheesy looking 4wd snorkel kit for $100. I wasted my horns crossing a creek on thanksgiving, so i have some other stuff to sort out in the mean time. if you come up with something, i would love to see it.



erikrs301
Dodge Dakota
JOIN HERE
 Email

12/11/2003
12:06:32

RE: Snorkel/intake
IP: Logged

Message:
it's for a Jeep XJ, but the concept is there to work with...

http://www.pirate4x4.com/tech/billavista/snorkel/snorkel.htm



oyotaco
Dodge Dakota
JOIN HERE
 Email

12/18/2003
11:28:02

RE: Snorkel/intake
IP: Logged

Message:
hey, i just checked out the SEMA site and they have pictures from the show last month. in there is a picture of an Xterra with an exoskeleton and a crazy snorkel/intake. it gives me some more ideas... check it out...



need a snorke
Dodge Dakota
JOIN HERE
 Email

5/29/2005
23:20:16

help me find 1
IP: Logged

Message:
Hi everyone whats up?? Im a 16 year old boy who lives in Tampa,FL. i currently own 1 of my fathers old trucks it is a 1985 Toyota Pick-up all diamond plate tooldoxes and dogboxes in the bed and the bed is also lined with diamond plate i am looking 4 a snorkel but can't find them anywhere...can u please tell me of where i can buy 1 or any good websites thx's 4 the help......



Purplemonster
GenIII
 User Profile


5/30/2005
09:33:05

RE: Snorkel/intake
IP: Logged

Message:
Hey bro I had that problem too. My buddies were skeet shooting, and I figured I was gonna blow some donuts in this *puddle* that ended up being 4 feet deep. I thought I blew my motor, and I was told I was very lucky I didn't. I shut the truck off, plugged in my obdII scanner into my pcm, and saw there were no errors. Restarted the truck and it ran great. Flushed my engine and tranny about a week later just to be safe. What I was gonna do is just buy a replacement filter element for a snorkel, they go for about $50, and just run black pvc through the fender, maybe rhino-line it for looks. Haven't done it yet though because sucking air through feet of ducting as oppposed to inches will kill what little power I have.


How deep can that pond possibly be?

BIGTYMER
Dodge Dakota
JOIN HERE


6/01/2005
10:36:02

RE: Snorkel/intake
IP: Logged

Message:
I used the stock airhat and then a pair of flanges like you'd use for making a CAI. Cut a hole through the firewall and bolted the flanges using plenty of silicone to seal it. Then I just had a piece of exhaust pipe bent to fit and mounted my air cleaner up under the dash.

I tried a "regular snorkel" and it didn't work I threw mud all up in that bad boy.



Matthew
Dodge Dakota
JOIN HERE
 Email

3/18/2008
01:00:04

RE: Snorkel/intake
IP: Logged

Message:
Today I ran my 1994 dodge dakota through 3 feet of water, sucked a crap load of water through the intake. spent 4 hours out on the trail getting the engine dried out (pulled the plugs and turned it over for a long time because it was throwin water out of the last 2 plugs) and got it running again. so far no harm done, but i am going to invest in a Safari snorkel and rig it up to fit my dakota.



Darrin
Dodge Dakota
JOIN HERE
 Email

12/09/2009
23:00:48

RE: Snorkel/intake
IP: Logged

Message:
i have a 07 dodge ram and its been in some deep mudd and alot of water i need to know where i can find a snorkle to put on it b/c as of last friday i blew it up i would like some ideas????



muddingdakota
Dodge Dakota
JOIN HERE
 Email

3/10/2012
00:18:54

RE: Snorkel/intake
IP: Logged

Message:
i am going to use an intake for mac performance out of florida i think. and then move the mopar perfomance pcm off the fender, remove the ac stuff on the fender and have k&w tool box company custom make me a tool box small emough to fit under the hood and hold the air filter and pop out threw the fender and run up the a pillar next to the window for the snorkel... i will be doing this next month....



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.