| From | Message |
dakotachris
Dodge Dakota
JOIN HERE
9/29/2003
11:21:46
|
 Subject: Help need spindles 2x4
IP: Logged
Message:
Ok guys I need your help does anyone have a set of 2x4 front spindles some that will fit a 98. I have a very good friend who looked at my truck and thinks he can make a set of lift spindles. He is very capable of doing this, he has been in the metal work for over 30 years. I will document everything if it works and let everyone know what to do. I am willing to pay for parts and shipping if the price is right. Thanks guys.
|
03FastDak
Dodge Dakota
JOIN HERE
11/25/2003
23:53:41
|  RE: Help need spindles 2x4
IP: Logged
Message:
hey there, i have an 03 Dakota 2wd and have been searching everywhere for lift spindles. i have researched the subject extensively and am in the process of getting a stock set off of a 00 that i will have a fabricator turn into 3-4" lift spindles. the only obstacles you will probably run into is wheel offset. try and get as little backspacing as possible or they will hit the post for the upper ball joint mount. let me know how it goes and good luck.
|
rivermaniac
Dodge Dakota
JOIN HERE
11/26/2003
20:06:34
| RE: Help need spindles 2x4
IP: Logged
Message:
please let me know what you guys come up with , I'm in the same boat , I have the fabtech 3" but would like more lift , and don't give me put on a body lift ..................I have eagle 589 with 3.25 backspacing and they should clear fine if the spindle was taller ...............
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
