| From | Message |
Dean
Dodge Dakota
JOIN HERE
8/06/2003
15:22:02
|
 Subject: Suspension + Body lift
IP: Logged
Message:
Anybody have a 3" suspension lift with a 3" body lift and if so what size tires and wheels are you running.
|
Minkus35
Dodge Dakota
JOIN HERE
8/10/2003
18:18:34
|  RE: Suspension + Body lift
IP: Logged
Message:
I have one and i have 32" X 11.5" tires. they rub if you cut the wheel however
|
FL 4WD
Dodge Dakota
JOIN HERE
8/16/2003
00:01:46
| RE: Suspension + Body lift
IP: Logged
Message:
32X11.50's on what kind of wheel?
width?
Offset?
|
Osyrus
Dodge Dakota
JOIN HERE
8/17/2003
13:13:31
| RE: Suspension + Body lift
IP: Logged
Message:
only 32 x 11.5 with 6 inches of lift....somethings wrong!
|
Scott
Dodge Dakota
JOIN HERE
8/17/2003
14:20:44
|  RE: Suspension + Body lift
IP: Logged
Message:
Probably 2WD!
|
Dean
Dodge Dakota
JOIN HERE
8/18/2003
07:09:05
| RE: Suspension + Body lift
IP: Logged
Message:
I was going to add the 3" suspension lift and keep the 3" body lift and try to fit 15x10 wheels under it with 33x12.5 tires which I am running now on the stock 16x8 wheels. Nerf bars have been ordered to hide the small amount of frame showing.
|
minkus35
Dodge Dakota
JOIN HERE
8/18/2003
16:38:03
| RE: Suspension + Body lift
IP: Logged
Message:
I have them on the stock rims and no there not off set. they are firestone firehwaks, and its 4x4 5.2 with dual exgaust
|
BADAZZDAK
Dodge Dakota
JOIN HERE
11/22/2003
07:58:23
| RE: Suspension + Body lift
IP: Logged
Message:
I have a 99 Sport 4x4 with 3 inch PA body Lift and a 3 inch Rancho susp lift. I am currently running 32x11.5 and have plenty room to go bigger.
|
bakindak
Dodge Dakota
JOIN HERE
11/22/2003
10:35:42
| RE: Suspension + Body lift
IP: Logged
Message:
With 6" of lift you should easily tuck 37" under your truck
|
92Dakota4x4
GenII
11/22/2003
14:51:18
| RE: Suspension + Body lift
IP: Logged
Message:
37"s ?????? AHahahahaha I don't think so!!
|
Tx-Hop
Dodge Dakota
JOIN HERE
11/24/2003
15:26:46
| RE: Suspension + Body lift
IP: Logged
Message:
33's are about the largest you'll be able to go. You'll have to tweak the t-bars too. I'm running 32x11.50's on 10" welds stone crushers.
51-510668 15x10 6x4.5 4.625bs
http://glen.dodgedakotas.com/hop/sidebodylift.jpg
I'm wanting to put 35's on the stock wheels but, i don't know if the 3:55 gears i have will work. I have to tow my boat during the summer so i think i might be able to get away with the 35's in the winter.
http://www.uberlame.com/files/images/tex/boat/intow.jpg
|
92Dakota4x4
GenII
11/27/2003
22:47:30
| RE: Suspension + Body lift
IP: Logged
Message:
4" suspension, 2" body,extra 1" form the torsion bars and add-a-leaf...35x12.50x15 on 15x8....3.55 gears useless on the highway,can't use overdrive, 4.10's sitting in my living room,install soon.... 
|
Dakota202
Dodge Dakota
JOIN HERE
12/03/2003
17:13:27
| RE: Suspension + Body lift
IP: Logged
Message:
Dude it must be different on my 03. 3" body lift and about an inch out of the torrsion bars. 35x12.5's on the stock 16x8 wheels. 5th is worthless 4th is marginal. But it kicks arse off road. Check it out:
http://pic7.picturetrail.com/VOL208/1430919/3201319/39541982.jpg
|
92Dakota4x4
GenII
12/03/2003
18:06:11
| RE: Suspension + Body lift
IP: Logged
Message:
The gen3's do have larger wheel openings....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
