| From | Message |
Big_Quad
Dodge Dakota
JOIN HERE
3/28/2003
12:41:10
|
 Subject: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Basically on the Mopar 3.92 gears and locker, these are the prices:
Front diff R&P SET $244.00.
Rear DIFF R&P SET $486.00
Rear Anti-Spin case $463.00.
May need some bearings also and shipping would be additional.
Contact Mark Welch at mwelch001@charter.net and tell him Don sent you for these prices.
|
4wDakota
GenIII
3/28/2003
14:00:23
|  RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
No offense but that's a rip. The rear gears should be $150-$200 tops. The trak-lok can be purchased for $180.
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
Big_Quad
Dodge Dakota
JOIN HERE
3/28/2003
14:30:03
|  RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Understand that these are factory Dodge gears and LSD, not aftermarket. I know aftermarket R&P and locks are much cheaper, but I have heard that they are they as quiet and reliable as stock Dodge gears? Not to mention warranty concerns.
I would love to spend less money on lower gears, or even opt for the 410s!! Does everyone think it's better to go aftermarket or factory? Pros and Cons?
|
4wDakota
GenIII
3/30/2003
17:23:02
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Factory parts are Dana Spicer brand. Factory LSD is just a Dana trak-lock. 4 whhelparts sells the Dana equipment, as does Randy's and most other gear retailers. Dana Spicer makes 4.10's for the Dana M35 front axle found in 97-99 Daks. That's what I'm about to get for my truck.
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
RaGuS
Dodge Dakota
JOIN HERE
3/30/2003
20:18:40
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
haha I read the title and it said ur sellin L.S.D. lol
|
Big_Quad
Dodge Dakota
JOIN HERE
3/31/2003
08:04:02
|  RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Hey thanks 4wdakota, nice to know that I can basically buy factory gears from third parties! That is a relief, I only like to go mopar parts!
|
Timberwolf
GenIII
4/01/2003
16:55:03
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Well, on the bright side, for what you were prepared to spend, now you can go ahead and get an air locker for the front too.
"I'd rather be fishing"
|
4wDakota
GenIII
4/02/2003
09:37:49
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Sorry bud, there is nothing available for the front of our trucks. Maybe someone will develop something for the 2000+ trucks but so far nothing is available.
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
timberwolf
GenIII
4/02/2003
10:31:36
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Wow, that sucks. I can get em for the Dana on my '99.
"I'd rather be fishing"
|
4wDakota
GenIII
4/02/2003
11:57:56
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Actually, I don't think you can. I have a 98 with the Dana M35 too. I've called around and no one makes a diff for the Dana M35. The case is different than all other Dana 35 cases. A product rep from ARB said they don't make anything and the current Dana 35 locker can't be made to fit it. Even the ford Explorer's Dana 35 has lockers.
But not our Daks
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
ian
Dodge Dakota
JOIN HERE
4/02/2003
13:10:09
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
if there's a GB for the 4.10's, i'm in!
|
Perpetrate
GenIII
4/02/2003
14:51:29
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
I am getting 4.10's and an Auburn in the rear. It will be the best for when I am towing or wheeling.
|
Timberwolf
GenIII
4/03/2003
16:19:53
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Hey thanks 4w. I saw they have them for the Dana 35 in catalogs, but never called to confirm they would fit a Dak. Just figured a 35 is a 35. Oh well, I probably wouldn't get a locker for the front anyway. Also, are your tires 33X10.5 or 12.5. Any rub probs. Those are the height I want to get when my 31's wear out, but not sure about width.
"I'd rather be fishing"
|
4wDakota
GenIII
4/04/2003
09:32:04
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
Mine are 12.50's they rub against the frame at full lock. I just learned to not crank the wheel all the way when turning.
BTW I'm not sure why they designed our diffs like they are but they aren't like a regular Dana 35. Like I said before its a totally different case on the inside. Someone at dodge dropped the ball.
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
robertsjut
Dodge Dakota
JOIN HERE
4/06/2003
17:34:07
| RE: Want 3.92 gears and/or LSD??
IP: Logged
Message:
I going to put a 3inch body on my 02 CC 4x4 and I'm going to run 33 11.50 and I was wondering if I should change my gears? If so what should I change to?
Justin
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
