From | Message |
bigdawg Dodge Dakota JOIN HERE
3/23/2003 13:32:32
|
Subject: bodylift and tire size IP: Logged
Message: i am putting on a 3 in body lift and i am going to put some 15x10 rims and i was wondering if i should put 31/12.50 or 33/12.50 boggers on it, i dont want to mess with the torsion bars and do any trimming what do you think will work the best
|
Matt Dodge Dakota JOIN HERE
3/23/2003 19:02:39
| RE: bodylift and tire size IP: Logged
Message: You should be ok with the 33's fitting on there. My friend just did a 3" lift and went with the 33's and they look and work great in my opinion!!
www.CannonCustomAudio.com
|
ian Dodge Dakota JOIN HERE
3/23/2003 20:02:46
| RE: bodylift and tire size IP: Logged
Message: i hate to be the voice of reason here, but 15x10 wheels with 33x12.5 tires will cause some significant rubbing. you'll need to at least turn up the torsions.
ian
|
97_blk_dak GenIII
3/24/2003 00:31:57
| RE: bodylift and tire size IP: Logged
Message: Ian is right. Those 15x10s are going to give you some serious problems. If you run them on 15x8s, (depending on the backspacing of the wheel you have) you will still probably have to raise your torsion bars a little and probably even do a little trimming if you're running boggers on them. I am running 15x8 wheels (with 3.25" backspacing) and 33x12.50 BFG A/Ts and I had to raise my torsion bars and do some trimming to get them to turn without rubbing. And the boggers are probably going to cause a lot more rubbing than mine did.
1997 5.2L V8 4X4 CC
|
conig Dodge Dakota JOIN HERE
3/24/2003 11:39:57
| RE: bodylift and tire size IP: Logged
Message: with 15x10 and boggers you will definately have to trim.
I don't think the boggers would look right on a 15x8 myself. if you trim carefully you will never be able to tell.
|
bigdawg Dodge Dakota JOIN HERE
3/24/2003 14:06:55
| RE: bodylift and tire size IP: Logged
Message: ok thanks for your help
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|