| From | Message |
jaggy
GenIII
3/19/2003
19:18:43
|
 Subject: Rancho in cab controller
IP: Logged
Message:
Has anyone installed the RS9700?
that is the controller for the RS9000 adjustable shocks.
I am looking for ideas of where to put the controller.
Any ideas welcome....(exept that one =p )
thanks.
|
2000BlackD
Dodge Dakota
JOIN HERE
3/22/2003
10:15:17
|  RE: Rancho in cab controller
IP: Logged
Message:
I own a Durango and posted an idea of placing the controls in the overhead console area for what I think is where a garage door opener would go. Not sure if your trucks are the same as the durango nor on the siza of ranchos controls and if they would fit. But I think this might take away from the cool/pimp factor of being able to adjust the shocks on the fly and having the controls in the cab an visible for all to see. Tha seemed to be the big downside for me.
2000 Slt Plus durango
|
for7v8
Dodge Dakota
JOIN HERE
3/25/2003
12:34:23
|  RE: Rancho in cab controller
IP: Logged
Message:
Jaggy,
Do a search for in cab Rancho, etc... You'll find the info I posted from my experience. It was on my Jeep, but might give you some insight.
|
jaggy
GenIII
3/25/2003
12:46:32
| RE: Rancho in cab controller
IP: Logged
Message:
Thanks for the posts guys.
I tackled this project on Sunday...
2000blackd I looked at puting it in the overhead console, I currently have a radar detecter installed there. the controller is a little big and the amount of wires and air tubes would have been a mess to run through the head liner.
I have a manual trans and opted to put the controller at the lowest point on the dash behind the stick shift. I looks good and can be reached while driving. I put the air compressor infront of the airbox. It works very well and looks clean.
I spent a little extra time thinking of all the places i could conceal the compressor and the controller, that is why i was curriouse where others had installed.
If anyone wants to see pics let me know and I can email...no web page yet.
|
RedQuad
GenIII
3/25/2003
13:57:51
|  RE: Rancho in cab controller
IP: Logged
Message:
Jaggy,
Just ordered my RS9000X's and controller this morning, would love to see pics of yoour install as I will be doing the same in about a week. you can send them to thornh@iwon.com.
RedQuad
|
Paul
Dodge Dakota
JOIN HERE
4/01/2003
08:55:50
| RE: Rancho in cab controller
IP: Logged
Message:
Jaggy,
I have been looking at doing the 9000X/controller install on my '99 Durango. Could you send me some pics to see where you put the controller and compressor, just curious to see how they look...
paul.spotten@mountainhome.af.mil
Paul
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
