| From | Message |
tony597fitter
Dodge Dakota
JOIN HERE
12/05/2002
20:23:24
|
 Subject: Just ordered PA 3" body lift and>
IP: Logged
Message:
33" x 12.50 pro-comp a.t. with eagle 589 rims. Is there anything I need to know about the body lift? I put a 3" suspension lift on my wifes cherokee, and was wondering if there is any tips or tricks to it? I thought I read somewhere you needed to weld some brackets on for the linkage or steering. If anyone has any tips it would be apprieciated. Also does anyone else have this setup, and do you have any probs., and do the 33" tires rub?
|
94 dakota
Dodge Dakota
JOIN HERE
12/06/2002
15:36:24
| RE: Just ordered PA 3
IP: Logged
Message:
I have a 3 inch body lift on my truck with 33-12.50's and I had to do some trimming on the front. not much so it shouldn't be that bad. it still rubs a little offroad, so I'm gonna cut just a little bit more off the front, and a little off the rear.
|
Canadakota
Dodge Dakota
JOIN HERE
12/06/2002
19:38:14
| RE: Just ordered PA 3
IP: Logged
Message:
If you have a floor shifter for the 4x4 (not electronic) then just buy all-thread and a coupler nut and extend the shaft up top instead of welding in a new extension. The steering extension just bolts in. It's a pretty easy install, especially since you done a sus. lift. There are a lot of other threads on here with good tips. check out
http://dakota.4mg.com/tutorials-sus-body.html
for some pics with instructions.../
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
