| From | Message |
Steve
Dodge Dakota
JOIN HERE
10/01/2002
22:48:56
|
 Subject: can i put 33's on a stock 4x4
IP: Logged
Message:
can i do this if i lengthen the studs and put spacers in so there isnt rubbing or will i now have to worry about them bottoming out inside the fenders?
|
born2steel21
GenIII
 
10/01/2002
23:14:26
|  RE: can i put 33's on a stock 4x4
IP: Logged
Message:
the only two ways that I've heard it being done was with the hanson bumper or with the extended fenders. You still have to crank the torsion bars and do some trimming with either set-up I believe.
-- Death Before Dismount --
|
forexfour
GenIII
10/02/2002
11:02:46
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
I am running 33's on stock with the Hanson Bumper. If you do not mind trimming some of the front well area and the bumper on each side you can. You will also have to trimm the back of the wells to. Minor frame rub at full turns. Torsion bar adjusted. You can go to my trucks web page to see the trimming I did.
FXF
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home page.
|
surfer_obx1
Dodge Dakota
JOIN HERE
10/02/2002
11:05:56
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
best way would be a 3in lift and then get a hanson bumper b/c that thing is sweet!!!!!!!
|
Rob454
Dodge Dakota
JOIN HERE
10/06/2002
01:44:52
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
Im running 33s on my truck and its completely stock no lift whatsoever. stock 15x8 rims. Im also running a Warn transformer and 8000 pound winch on the front and the only place they rub is on full turns on the frame but its still a light rub. I did have to trim the fender well plastic and the front air dam slightly to make for a no rubbing fit. also the rear corners of the plastic wheel wells need trimming but its pretty easy.
Rob
|
tom
Dodge Dakota
JOIN HERE
10/07/2002
01:09:15
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
these are 33x12.5s your referring to, right?
|
forexfour
GenIII
10/07/2002
10:40:09
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
Yes 33x12.5x15 MT and 285x75x16 AT For me.
FXF
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!Forexfour's home page.
|
Ken
Dodge Dakota
JOIN HERE
10/08/2002
15:15:19
| RE: can i put 33's on a stock 4x4
IP: Logged
Message:
Since the stock 31's do some steering lock rub, the frame contact is tolerable. Anyone tried the 33x10.5's on the stock rims w/o the body lift?
Ken
98 5.2CC, 4x4, 127,000 mi,
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
