| From | Message |
EyeTrip
R/T
9/20/2002
16:09:51
|
 Subject: RE: I found it!
IP: Logged
Message:
The cruse is in its stock place for this truck.
I'll do the "S" bolt if this setup now gives me any trouble (The airhat is on really tight rite now) And I'm not sure who made that TB but I had measured it at the butterflys to see what it was and it turned out to be 52mm.
The real bitch I have is, that damn plastic collar stand off on between the airhat and the TB. It's kina cheeeezy, a real weak link.
HomePage
|
kota on 20s
GenIII
9/20/2002
18:13:14
| RE: I found it!
IP: Logged
Message:
what kind of a differance did you notice when you put the TB on?
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
kota on 20s
GenIII
9/21/2002
01:11:25
| RE: I found it!
IP: Logged
Message:
the S bolt dosent make the airhat go on tighter, it allows more airflow to go through the TB. see the plate that the stud is in on the TB? it eliminates that.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
EyeTrip
R/T
9/22/2002
17:37:57
| RE: I found it!
IP: Logged
Message:
The TB came with the truck.
I think I'll do the "s" bolt mod this winter.
HomePage
|
kota on 20s
GenIII
9/27/2002
03:18:40
| RE: I found it!
IP: Logged
Message:
can you hear the bypass valve hissing while driving with the discharge going back into the intake? i just hooked mine up with a filter like bernd has on his truck, and its annoying as all hell. it makes me want to drive around in boost, just so i dont have to listen to it hissing.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
EyeTrip
R/T
9/27/2002
05:43:28
| RE: I found it!
IP: Logged
Message:
Nope, The only time I hear anything is when it's under boost. Other than that you can't tell if there is even a bypass valve.
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
