| From | Message |
Dakota Bob
GenII
 
3/15/2002
07:21:35
|
 Subject: Jet Chip
IP: Logged
Message:
Do any of you guys know if these chips will work from on year to another? Like a 1994 to a 1995 same engine and trans? I called Jet and they told me it wouldn't work. Is their that much difference in one year on these computers? I was thinking as long it was the same generation it would work. I had a chance of getting a stage 2 chip cheap and was afraid to try it.
Bob
Cincinnati
Jet chip stage 1 JBA Headers,19# fule Injectors,Flow master 40s Auto Lite 3923 K/N Chrome Filter 180 T Stat ,TPS adjusment,Flometrics throttle body
|
Rascal
GenIII
4/29/2002
13:02:15
|  RE: Jet Chip
IP: Logged
Message:
Bob, I would trust what Jet says, they make them, they likely know more than we do.
Rascal
98 SLT 2wd 5.2 Powerdyne S/C (just bought), Powerslots, Hawk pads, Snugtop hard tonneau cover, Rancho brushguard and sidesteps, Flowkooler, Edelbrock shocks and dbl timing chain, Flowmetrics TB, Hella 500 lights, Magnacore wires, Autolites, Black Magic #150 and #110, etc...
|
Bob W
GenI
4/29/2002
21:36:00
| RE: Jet Chip
IP: Logged
Message:
Trust Jet
|
Dakota Bob
GenII
4/30/2002
07:18:57
| RE: Jet Chip
IP: Logged
Message:
Thanks Rascal and Bob, I think Im going to go with the venom 400 from truckperformance.com I will let you guys know when I get one.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
QuickRacing
GenII
5/16/2002
10:37:56
|  RE: Jet Chip
IP: Logged
Message:
Personally I think Jet is filling full of sh!t. I talked to them when I bought mine and they said as long as it was 3.9 to 3.9 I'd be fine.. The part #'s are all the same!? At any rate ... If you are interested in a Jet chip, I have one I'll sell you. StageII **It will work on your application!**
Drew
|
Dakota Bob
GenII
5/16/2002
19:21:41
| RE: Jet Chip
IP: Logged
Message:
QuickRacing what year is it off of? and how much do you want for it. Mine is a 3.9 Auto.
thanks
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
QuickRacing
GenII
5/17/2002
15:51:32
|  RE: Jet Chip
IP: Logged
Message:
The chip is off a 1996 3.9L, I got if for my old 94 3.9L, that I ended up selling when I bought my 96. Email me at QuickRacing_RT@yahoo.com if your interested.
****I have the original box, including instalation instructions, and extra water proofing strips****
Drew
|
Dakota Bob
GenII
5/17/2002
17:25:42
| RE: Jet Chip
IP: Logged
Message:
Drew I sent you an email.Im interested in the chip.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
Rascal
GenIII
5/18/2002
13:10:23
| RE: Jet Chip
IP: Logged
Message:
I have the Jet on my 5.2 and it makes a big difference, but will remove it when I get time to install my Powerdyne Supercharger.
Rascal
98 SLT 2wd 5.2 Powerdyne S/C (just bought), Powerslots, Hawk pads, Snugtop hard tonneau cover, Rancho brushguard and sidesteps, Flowkooler, Edelbrock shocks and dbl timing chain, Flowmetrics TB, Hella 500 lights, Magnacore wires, Autolites, Black Magic #150 and #110, etc...and a 57 Harley Panhead
|
B1llyw
GenIII
5/20/2002
12:36:43
| RE: Jet Chip
IP: Logged
Message:
Since 96 is OBDII and 94 is OBDI, I don't think a Jet Chip off of a 96 will fit a 94. It's not just a matter of programming, they have entirely different connections.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
Dakota Bob
GenII
5/20/2002
14:57:25
| RE: Jet Chip
IP: Logged
Message:
Bill thanks for pointing this out, I didn't know there was a difference in them.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
QuickRacing
GenII
5/20/2002
15:03:00
| RE: Jet Chip
IP: Logged
Message:
Thanks for correcting me on that!!! Damn! good thing I sold my 94, and got a 96 or I would have been screwed! Sorry Bob.. Didn't mean to try and screw you!
Drew
|
Dakota Bob
GenII
5/20/2002
16:44:12
| RE: Jet Chip
IP: Logged
Message:
Drew, no problem glad Bill brought it to our attention.
Thanks
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
J and J Auto
GenII
9/18/2003
10:58:32
| RE: Jet Chip
IP: Logged
Message:
I have a stage 2 99501s for 95 3.9 auto and it
will work on a 94
The # for 94 is 99401s same chip just the # for
the year is diff.
I noticed better low end and gas milage with a
little better pull around 3000
Make me an offer
Larry
J&J Auto
|
wadak
GenI
5/19/2004
22:35:47
| RE: Jet Chip
IP: Logged
Message:
I just went thru this exercise at jetchip.com. The jetchip for the 1996 to 2003 3.9 is the same for number automatic or manual. The stage 1 is 90001 and the stage 2 is 90001s auto or manual. I believe that the same applies for the 5.2 as long as it is the OBDII. Larry, If you want to sell you jet chip how about 80.00.
|
Wadak
GenIII
5/21/2004
02:40:49
| RE: Jet Chip
IP: Logged
Message:
Larry, Ypu have new mail. :<)
|
PATROLMAN115
DakotaEnthusiast
5/25/2004
07:24:25
|  RE: Jet Chip
IP: Logged
Message:
I just bought a stage 2 for my 2000 3.9....installed it the way they instructed....when I hit the throttle its sounded like it was constipated and was tryin to fart or something...went through the troubleshooting process with them and had to send it back cause they said it might not have any data inside of it....After reading the majority of unsatisfied purchasers on here, I know what category I fall into now...lol Anyway, its on its way back to the factory and they are replacing it...we'll see what happens....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
