| From | Message |
Jopi
GenI
 
11/10/2005
02:35:24
|
 Subject: Dak' special parts?
IP: Logged
Message:
Hi,
I'm looking for many parts for my Dak':
Gibson dual rear
Westin bed exender
Clear lenses
Street scene Hitch, roll pan
Lowering kit
Air induction system
Tailgate spoiler
...
Wich is the best site to find all this parts? I try with car-stuff.com (they have many parts) but they don't ship overseas (I'm overseas...)
Thanks
Jopi
Go Fast...or Go Home!
|
DakotaSport
GenIII
11/16/2005
13:55:14
|  RE: Dak' special parts?
IP: Logged
Message:
Ebay will have what your looking for. I got my clear corners on Ebay for 20 bucks with shipping. I dunno how well you will do with being overseas, but it shouldn't be too bad.
00 Dakota Sport CC 4.7L 4x4
|
toolfan
GenIII
11/16/2005
18:21:29
| RE: Dak' special parts?
IP: Logged
Message:
test
toolfan
|
95V6
GenII
12/24/2005
02:46:18
| RE: Dak' special parts?
IP: Logged
Message:
Jopi, btw, your truck is GenIII, not GenI.
You can find links to the good sites if you click on the "links" button at the top of this page. Additional sample:
summitracing.com
krcperformance.net
autoanything .com
autopartswarehouse.com
customtrucks.com
performancecenter.com
jegs.com
and many many more...
95 3.9L 4WD V6, K&N, Gibson exh, JBA hdrs, JET stage II, MSD 6A, Rancho shocks , Transgo kit, 4.10 LSD, F&B 48mm TB
|
davsblknwht
GenII
2/12/2006
05:27:45
| RE: Dak' special parts?
IP: Logged
Message:
I have seen may differant cold air systems available. I found and intalled a Ram Air Box from Air Inlet System on my 1993 318ci. The kit uses and fiberglass box with dual 4in inlets that are routed to the froft of the truck on either side of the radiator fro true cold ram air. You have to relocate the battery abit but I found that the total overall performance and torce was wery noticable. When I bought mine three years ago for $175.00 it was way cheaper the the comitition at $250 or more and worked better. You can read more about the product by doing a search key word "RAM AIR BOX". The kit listed for my 1993 Dak called for round 6in cones. I used the fiberglass 6in x 4in instead for a better fit . One where the old factoery inlet was and in the same place on the opposing side.
Good luck
Be Safe
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
