| From | Message |
Low4c
Dodge Dakota
JOIN HERE
2/16/2003
20:12:33
|
 Subject: beltech or djm
IP: Logged
Message:
which kit is better for a 3/5 drop? and will ride good, but will fill my wheel well nicely on 17's with low profile tires?
and is there much difference in a 3/5 from a 4/6 drop when it comes to the niceness of the ride? would 4/6 look good on 17's with low pro's?? if anyone has a picture for an example. then that would help a lot. thanks
|
93venom
Dodge Dakota
JOIN HERE
2/17/2003
04:58:14
|  RE: beltech or djm
IP: Logged
Message:
IMO belltech makes superior product. but djm is also quality stuff. the difference in ride betwwen the 4-6 and the 3-5 will be noticable. and for a 6 inch drop you will need a cnotch, unless you like hearing your axle hit the frame. but i dont think belltech makes a 4-6 drop, id go with the djm setup, 4-6 with notch and like 245-45 or 255-45 17 inch tires
dont go to lowpro or you will still have fenderwelll gap,
|
Low4c
Dodge Dakota
JOIN HERE
2/17/2003
14:37:30
|  RE: beltech or djm
IP: Logged
Message:
thank you. that helps alot. but why would it show "more" fender well, the lower i go?
|
Low4c
Dodge Dakota
JOIN HERE
2/17/2003
15:01:42
|  RE: beltech or djm
IP: Logged
Message:
dam. nevermind, i got it. had to read it twice. thanks for the info.
|
RaZoR
Dodge Dakota
JOIN HERE
2/17/2003
17:01:46
| RE: beltech or djm
IP: Logged
Message:
I put on the Belltech 2/4 drop on my dak. I'm running 255,45 18's on it and would like to see less wheelwell but my ride is really good. I wouldn't put too low a profile running 17's
(
|
stephen
Dodge Dakota
JOIN HERE
2/23/2003
05:34:07
| RE: beltech or djm
IP: Logged
Message:
hey razor,
i was thinking about the 2/4 with 18s, how much wheel well is left? what tires should i put them on?
|
Joezzzzzzzzz
Dodge Dakota
JOIN HERE
2/23/2003
20:41:36
| RE: beltech or djm
IP: Logged
Message:
I just put a 2/2 on my R/T CC , Its pretty low now , I dont think I would want it any lower that that really for a everyday driver , I used the DJM lower arms and rear hangers , Kit was nice and installed quit well ... Email me if you want some pics spddracer@aol.com
|
Fenris
Dodge Dakota
JOIN HERE
2/24/2003
08:33:24
| RE: beltech or djm
IP: Logged
Message:
I'm gonna get a DJM 3/5 kit later on this Summer, using A-arms and rear hangers...
I'm gonna go with 255/50HR17 tires.
|
Low4c
Dodge Dakota
JOIN HERE
2/25/2003
00:53:35
|  RE: beltech or djm
IP: Logged
Message:
right on, me to Fenris. same rims too. what kind a rim? i got those chrome RT rims. just debating on the tire size. cause its not lowered 3/5 yet, just 2/3. keep me posted.
|
RaZoR
Dodge Dakota
JOIN HERE
2/25/2003
08:46:49
| RE: beltech or djm
IP: Logged
Message:
Stephen...... The wheel wells aren't filled right up so if ya want the real SLAMMED look then ya may want to go a little lower, but i think its just right. I put on 255,45,18's. Dunlop sp sport 9000's. The nice thing about the 2/4 is that ya can still drive the truck around town without bottoming out all over the place.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
