| From | Message |
GLenn
Dodge Dakota
JOIN HERE
1/19/2003
21:24:11
|
 Subject: MOOG Ball Joints
IP: Logged
Message:
FOr anyone wondering if the 1999 Ball Joints will fit a 2000...they will I just installed a set on my truck today...no problems at all. Might I add, the Moog's are very well built and look like they will last quite a while.
|
Ted
Dodge Dakota
JOIN HERE
1/19/2003
23:54:29
|  RE: MOOG Ball Joints
IP: Logged
Message:
How hard is this to do, and what all has to be done? Im not real knowledgable about this situation but I think my left side is shot.
|
Glenn
Dodge Dakota
JOIN HERE
1/20/2003
18:50:22
| RE: MOOG Ball Joints
IP: Logged
Message:
Well, it takes a couple air tools they way I did it. I used a cutoff wheel to make X-shaped cuts on the top of the rivets, an air chisel to knock the tops off the rivets and the same air chisel to knock the rivets out. Everything else is easy.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
