| From | Message |
Lello
Dodge Dakota
JOIN HERE
1/10/2003
11:14:19
|
 Subject: Ground Force Kit for R/T
IP: Logged
Message:
Any one have it?? It's the one I'm thinking of getting. It is a 2/2 inch drop which is all I want. Part # is 9356 for R/T
|
Lello
Dodge Dakota
JOIN HERE
1/21/2003
23:28:15
| RE: Ground Force Kit for R/T
IP: Logged
Message:
No one??? Trying to find out if its a true 2/2 drop as this part number is specifically for the r/t model. I've emailed them twice now but zero response. Also considering DJM 2/3 drop but I do want the rear slightly higher in the back and not sure if the 2/3 will look level.
Thanks
|
UCFDakoda
Dodge Dakota
JOIN HERE
1/22/2003
22:13:27
|  RE: Ground Force Kit for R/T
IP: Logged
Message:
I have the 3/4 drop on the cc v6 dakota. It rides great and I used the r/t drop on my v6 because I have 17 inch wheels. Would recommend and the shocks are great. No problems....
|
SwickedRT
Dodge Dakota
JOIN HERE
1/25/2003
08:37:57
|  RE: Ground Force Kit for R/T
IP: Logged
Message:
I have the ground force 2/2 for my R/T (coils/blocks) I got it from a vendor - and don't knwo the P# off the top of my head. Email me swickedRT@swickedweb.com and I'll contact him - its a decent kit for the money. I have a ton. cover on teh back so it evens out the truck almost. REMEMBER if you do it - you gotta trim your front bumpstops (can use a serated knife (and can be dont after install) and must remove rear bumpstops and trim them 1/2 or more. Or you will ahve a VERY harsh ride. The ride is good for the $$ - I am considering going with hangers in the back - w/ no shackles - so thats an option for you as well. Hit me up via email and i can get a good price for you as well
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
