| From | Message |
waterpolo
Dodge Dakota
JOIN HERE
12/03/2002
18:46:48
|
 Subject: Hotchkis Install Help
IP: Logged
Message:
I just bought the Hotchkis front 2 inch drop coils and the Hotchkis 3 inch drop rear leafs for my 99 slt with the 3.9, 5 speed. I was wondering if anybody who has installed it had any tips or tricks when installing the kit? Also i just recently bought new stock shocks for it (didn't think i would do the drop so soon), can i still use this shocks or do i have to change and if so what do you recommend?
|
BigBen
Dodge Dakota
JOIN HERE
12/03/2002
19:57:20
|  RE: Hotchkis Install Help
IP: Logged
Message:
I was told no, look back at a recent post that I did Labled "Shocks" posted on 11/29/02. It should answer all your questions.
98 Dodge Dakota
40 Flowmaster
Airaide intake
255/60/17 BFGoodrich Comp T/A W/ R/T rims
*soon to come 2/3 Hotchkis Drop
|
waterpolo
Dodge Dakota
JOIN HERE
12/04/2002
09:11:54
|  RE: Hotchkis Install Help
IP: Logged
Message:
cool thanks on the info....i had another question, with the 2/3 drop does this affect the drive shaft angle or pinion gear angle at all?
|
BigBen
Dodge Dakota
JOIN HERE
12/04/2002
15:22:03
| RE: Hotchkis Install Help
IP: Logged
Message:
Sorry dont know, but i dont think i will. I have not heard anything about it, but I think its a good question. Hope someone out there knows the answer.
|
tim
Dodge Dakota
JOIN HERE
12/04/2002
16:15:45
| RE: Hotchkis Install Help
IP: Logged
Message:
with a small drop the pinion angle will not be harmed at all. anthing more the 5 inch drop you will have to start getting into pinion shims and other stuff, but you will be fine.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
