| From | Message |
lowrider
Dodge Dakota
12/06/2001
18:15:43
|
 Subject: 4/6Drop
IP: Logged
Message:
when a do a 4/6Drop do i have to cut the frame.
|
kota on 20s
GenIII
12/06/2001
18:20:10
| RE: 4/6Drop
IP: Logged
Message:
yup!
Eric
|
lowrider
Dodge Dakota
12/06/2001
18:23:03
| RE: 4/6Drop
IP: Logged
Message:
why do i have to cut my frame
|
dropt98dakota
Dodge Dakota
12/06/2001
18:26:58
| RE: 4/6Drop
IP: Logged
Message:
so your axle tubes don't slam against the frame everytime you hit a bump
|
D
Dodge Dakota
12/06/2001
22:55:12
| RE: 4/6Drop
IP: Logged
Message:
frame loves to pound on those rear-ends!
p.s. mine is 6" in the rear and all I did was get
a low profile bump stop. no frame cutting. just
have to drill a new hole for the bump stop.
|
lowrider
Dodge Dakota
12/07/2001
14:40:26
| RE: 4/6Drop
IP: Logged
Message:
do you like the way it rides with the bumpstop
|
D
Dodge Dakota
12/07/2001
22:08:07
| RE: 4/6Drop
IP: Logged
Message:
hits a little, on bumps, if you use a stiff enough
shock, the frame wont hit to often, but stiff
shocks make for a bumpy ride?? lose/lose
situation. If your dak's warranty is up, i would
cut the frame.
|
kota on 20s
GenIII
12/07/2001
23:13:40
| RE: 4/6Drop
IP: Logged
Message:
you dont have to wait until the warenty is up. it will only void the warenty on the frame. you dont really need a warenty on the frame anyway. how many times does the stock frame bend or break? the c-notch will come with its own warenty anway.
D, where in california do you live?
Eric
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
