| From | Message |
AC
Dodge Dakota
JOIN HERE
11/05/2002
10:30:18
|
 Subject: 3/5 CONCERN
IP: Logged
Message:
HEY GUYS WHATS UP, I JUST FINISHED PUTTING ON A 3/5 CONTROL ARMS AND HANGAR-SHACKLE KIT FROM DJM AND ITS NICE....HOWEVER I NOTICED MY TURNING RADIUS IS NOT AS WIDE AS BEFORE. PREETY MUCH WHAT IM SAYING IS THAT I HAVE ONLY LIKE 70% TURNING THAN BEFORE MAKING PARKING IN TIGHT PLACES AND UTURNS VERY VERY DIFFICULT. I HAVE 255/50/17'S ON MY TRUCK, ANY SUGGESTIONS ON WHAT I CAN DO?
|
dr0p0ff
DakotaEnthusiast
11/05/2002
11:11:42
|  RE: 3/5 CONCERN
IP: Logged
Message:
you can't really do anything about that man. if you get drop a arms you get that side effect. i've got the same setup as you and that was one of my major complaints. you get used to it though
Keep On Truckin!
Sgt G
|
Kevin
Dodge Dakota
JOIN HERE
11/05/2002
11:54:58
| RE: 3/5 CONCERN
IP: Logged
Message:
Hey AC, Do you have any problems with your tires rubbing the fender wells. What year is your truck. The reason I ask is I had ordered a 3/5 drop from DJM but cancelled the order because of rubbing complaints I have heard with stock tires on my 02 qc. Thanks Kevin
|
ac
Dodge Dakota
JOIN HERE
11/05/2002
12:06:12
|  RE: 3/5 CONCERN
IP: Logged
Message:
Hey, i guess your right...ill get used to but it will take some time =)
My tires dont rub at all
|
flamedR/t
Dodge Dakota
JOIN HERE
11/05/2002
20:32:57
| RE: 3/5 CONCERN
IP: Logged
Message:
I have a 3/5 drop on my 2000 R/t and it turns pretty bad to. Get some smaller tires and skinnier rims like a 17x8 with some 245-45-17 up front and that has help alot. I also have a C-Knotch in the rear this helps the frame banging alot.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
