| From | Message |
Bryan Elkins
Dodge Dakota
JOIN HERE
9/27/2002
16:49:10
|
 Subject: Problems with DJM drop kit
IP: Logged
Message:
I bought a DJM drop kit 3 for the front 5 for the back for my 2001 dakota and it lowered the back really good but the front was supposed to have been lowered 3 inches but it didn't go down three inches....now my truck looks kinda funny cause the back is alot lower than the front....anyone else have this problem? What can I do to fix it? Did they send me the wrong springs?
|
D
GenIII
9/27/2002
18:10:50
| RE: Problems with DJM drop kit
IP: Logged
Message:
what motor do you have?
01 4.7 CC auto 3.92 LS
Dynomax 3" catback, dumped
HO cams, HO intake manifold
ported-polished 68mm TB
180 stat, no clutch fan
airaid intake, DJMdrop 3-6
|
gooberlog
Dodge Dakota
JOIN HERE
9/27/2002
22:15:19
| RE: Problems with DJM drop kit
IP: Logged
Message:
I also had this problem, my friends refer to it as "Droopy Drawers" or "Saggy Ass". I also installed the DJM3/5 kit on my 01CC 3.9 sport. Mine isn't THAT noticeable so i left it alone for now, but i'm hoping that a front bodykit will help even out the appearance.
|
lowdaksport
Dodge Dakota
JOIN HERE
9/27/2002
22:56:35
| RE: Problems with DJM drop kit
IP: Logged
Message:
i had the same problem. just get the control arms. the springs are made for a v8.I got the springs and 2 in control arms. then the hanger and shackle kit plus blocks to level it out side to side and front to back.
|
n8 dawg
Dodge Dakota
JOIN HERE
9/28/2002
02:59:24
| RE: Problems with DJM drop kit
IP: Logged
Message:
i had same problem, i got 3 inch control arms and it lowered me down to a 5/5......if u want 3" coils for a v6 then u shoulda boguth the belltech coils....
|
Bryan
Dodge Dakota
JOIN HERE
9/28/2002
20:57:34
| RE: Problems with DJM drop kit
IP: Logged
Message:
Where can I get the control arms for cheap?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
