| From | Message |
chris
Dodge Dakota
JOIN HERE
9/16/2002
16:34:02
|
 Subject: Bumper cover
IP: Logged
Message:
Anyone have a bumper cover on their dak? If so, where did you get it from. Thanks
--
Chris
|
Rob
GenIII
9/16/2002
16:43:46
| RE: Bumper cover
IP: Logged
Message:
I have the street scene and I ordered it from aftermarket
1NICEDAK
|
deflated one
Dodge Dakota
JOIN HERE
9/16/2002
17:46:26
| RE: Bumper cover
IP: Logged
Message:
Rob,
What size are your wheels and what is the size of your tires as well. I like your setup!
|
Rob
GenIII
9/16/2002
18:41:48
|  RE: Bumper cover
IP: Logged
Message:
Thank you 
255/45/18 on18x8 wheels with 6.25 backspacing.
1NICEDAK
|
chris
Dodge Dakota
JOIN HERE
9/16/2002
20:35:52
| RE: Bumper cover
IP: Logged
Message:
So let me get this straight. It is a cover that goes over the bumper? Or is bumper cover just a fancy name for it. Because I have a small crease in my bumper, and instead of spending 400 for anew bumper, i can get a cover which adds looks and will cover the crease up. Saving me $$ and giving me looks. Is this right?
--
Chris
|
Marks DQC
GenIII
9/16/2002
22:12:27
| RE: Bumper cover
IP: Logged
Message:
I have the same cover. It is a cover over the bumper. You have to remove the lower valance, but the bumper stays in place.
2001 Dakota Quad Cab SLT , 4.7L, Auto, 3.55, Garnet Red over Slate
Zaino, Tint, Vent Guard, Gaylords Lid, Hotchkis, Bilstein, Wet Okole Covers, Painted Grill Shell w/ Ram inserts, S/S Bumper/Valence Cover, Billet Antenna, Precision Roll Pan, APC Clear Corners, Airaid, Gibson
|
chris
Dodge Dakota
JOIN HERE
9/17/2002
16:38:30
| RE: Bumper cover
IP: Logged
Message:
97-00 DODGE DAKOTA 2WD/4WD BUMPER & DURANGO GRILL POL
That is all I could come up with from the aftermarket place. Is this what you got? Also, how much was it for your paint and prep mark? Thanks
--
Chris
|
Rob
GenIII
9/17/2002
18:09:11
| RE: Bumper cover
IP: Logged
Message:
Thay dont have much on the web.call them and get a price for the streetcene bumper cover. Shop around to find the best deal.Try premierautomotive also.I think Jonas can get the stillen and streetscene covers.The cover painted cost me like $400.Most body shops wont paint it because it is injectedmolded and is more difficult to paint.Atleast localy thats what I found out.
1NICEDAK
|
chris
Dodge Dakota
JOIN HERE
9/18/2002
16:39:10
| RE: Bumper cover
IP: Logged
Message:
I know a bodyshop that does everything. I can definatly get it painted, so that's not a problem. I just want to get rid of this nasty dent in my front bumper not to mention the added looks:) For anyone in the dallas ft/worth area. "Best In Show" is the place to go. Thanks
--
Chris
|
pappie1
Dodge Dakota
JOIN HERE
9/20/2002
01:56:12
| RE: Bumper cover
IP: Logged
Message:
hmm.... I was thinking about getting a bumper from jonas as well.... wonder how many for a group buy
|
jesse
Dodge Dakota
JOIN HERE
9/23/2002
23:57:44
| RE: Bumper cover
IP: Logged
Message:
I have the stillen bumper, its only $275 on there website they have 2 kinds, email me for pics of my truck, or any questions, thanks
|
chris
Dodge Dakota
JOIN HERE
9/30/2002
19:33:31
| RE: Bumper cover
IP: Logged
Message:
where you get your cover from jesse?
|
DakUSA
DakotaEnthusiast
10/01/2002
07:54:37
| RE: Bumper cover
IP: Logged
Message:
I got mine from Randy at www.worldwideperformanceparts.com Give him a call I think it was around 275-280 shipped not sure you need to call him direct his number is on the website. Tell him Chris from Dakota USA sent ya
Chris Lambert
President Dakota USA
01 Graphite QC -- 4.7 Auto, K&N Drop in, MBRP Dual Exhaust Custom bent on 45s,
Bed Rug, Bed Rails, Euro Tails, Clear Fronts,Truxedo Bed cover, Custon Leather seats, NR Auto gauges,
Boyds Timeless 6s with 275/50/17 Nitto NT450s, GTS style hood, SS front
|
2THEXTRM
GenIII
6/09/2003
21:10:58
| RE: Bumper cover
IP: Logged
Message:
Anyone else had/having trouble getting their SS Gen 2 Bumper to fit properly on a 01+ Sport with the one piece front bumper? I removed the two side slats, but left the center slat in fascia that lines up behind the center slat in the SS cover. The passanger side is mostly tight and around the fog light properly but the driver side is out about an inch from fitting flush against factory bumper fog light hole as well as not pushing past or upto the top rear edge of bumper under the grill? I don't see where it is hitting, but is hard to tell when it is mounted and don't have the time this week to take the front bumper back off by myself to avoid scratching the new paintwork up... so, does anyone have any ideas or had this happen to them and how to correct it?
Thanks, Bob.
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
adam
Dodge Dakota
JOIN HERE
6/10/2003
21:42:05
| RE: Bumper cover
IP: Logged
Message:
heres my wings west. (im selling these APC mirrors)
|
2THEXTRM
GenIII
6/10/2003
22:08:04
| RE: Bumper cover
IP: Logged
Message:
Thanks for the help;)
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
2THEXTRM
GenIII
6/10/2003
22:08:12
| RE: Bumper cover
IP: Logged
Message:
Thanks for the help;)
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
