| From | Message |
Remil
Dodge Dakota
11/16/2001
12:55:01
|
 Subject: C-notch ?
IP: Logged
Message:
How big of a c-notch would I need to get the clearance so i can lay frame with an airbag setup?
|
kota on 20s
GenIII
 
11/16/2001
13:30:55
| RE: C-notch ?
IP: Logged
Message:
it depends on how big of rim and tire you are running. usually people do a step notch when runnning baggs. if running a small rum (like 17") you can take the notch to the bed without cutting the bed. if you had a 20" you would have bring the notch through the bed.
Eric
|
Remil
Dodge Dakota
11/17/2001
01:17:27
| RE: C-notch ?
IP: Logged
Message:
I'm gonna be using 18x8 with 245/40/18 tires, anyone else have anything
|
kota on 20s
GenIII
11/17/2001
12:42:10
| RE: C-notch ?
IP: Logged
Message:
my friend bagged his R/T with the same tire you have and he cut the center of his bed out. you MIGHT not have to do it, but it will be close.
talk to a shop that has done a dakota on 18's and see what they have to say
Eric
|
etankaom
Dodge Dakota
12/16/2001
17:41:44
| RE: C-notch ?
IP: Logged
Message:
I was running bags on my 2000 dakota with 18x8.5's. I can tell you from my own experience that the only way you're gonna lay frame is with a step notch. and even with a notch you're gonna have to 4-link your rear to get it all the way down. I used a 8" step notch on mine and i can tell you with any size step notch you use you're gonna have to cut out a section of your bed. if you need anymore help or some pics of how mine is setup, feel free to lemme know.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
