| From | Message |
Iwannadrop
Dodge Dakota
JOIN HERE
7/12/2002
00:45:57
|
 Subject: C-notch and how to make one.
IP: Logged
Message:
Can't you buy them from DJM? I see that they include them in most of there 4/6 drop kits? If not would you just got to a suspension shop and have them do it there or is it possible to do it yourself? Thanks
|
D
Dodge Dakota
JOIN HERE
7/12/2002
01:14:00
| RE: C-notch and how to make one.
IP: Logged
Message:
you can make it yourself, but by the time you
finish measuring, cutting and welding, you're
probably better of spending the 30 something
dollars, or whatever they cost.
|
IntenseDak39
*GenIII*
7/12/2002
21:33:17
| RE: C-notch and how to make one.
IP: Logged
Message:
most notches cost $100+. I made my own "monster" notches but it took a good 3 weeks to get evey thing done right. I just went to the local hardware store and bought 2" wide steel that was about 4' long and cut.... and cut some more and welded and welded some more until it was done. It looks really neat but is a big pain in the @$$ and if you dont have the patience then you probably should just save some money
intensedak3.9
|
GLenn
Dodge Dakota
JOIN HERE
7/13/2002
04:27:00
| RE: C-notch and how to make one.
IP: Logged
Message:
Nice setup on your ladder bars! What brand of coilovers did you use? Also what rating are those coilover springs?
|
IntenseDak39
*GenIII*
7/14/2002
15:34:22
| RE: C-notch and how to make one.
IP: Logged
Message:
thanx!
the coilover shock kit is competition engineering, it has comp. engineering drag shocks, and comp. engineering 150# coils. I might switch to a 125# coil later... because its pretty darn stiff... but that also would be from the unforgiving shocks....
intensedak3.9
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
