| From | Message |
Iwannadrop
Dodge Dakota
JOIN HERE
7/05/2002
08:28:29
|
 Subject: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
Hi, I have been lookin at getting a 3/5 drop kit for my 00 dakota sport CC i was wondering if i would still be able to to haul 1 snowmobile on the back and pull a double snowmobile trailer with 2 on it if i get the drop. Is there anyone out there that does the same with a 3/5 kit already installed? Anyone have any idea?? thanks.
|
n8 dawg
Dodge Dakota
JOIN HERE
7/05/2002
13:53:35
|  RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
ive got my 3/5 kit and i know if i put anything in the bed over 300lbs my truck sits on the bump stops.....i sunno about a trailer but i know it would hit the bump stops alot.....oh yea if u get a 3/5 kit dont get djm suspension coil springs if u have a 3.9L, only lowers the front 1-1˝in.
|
iwannadrop
Dodge Dakota
JOIN HERE
7/05/2002
16:51:17
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
If i got the frame c-notched would that fix the problem? I heard someone talkin about that. thanks
|
Glenn
Dodge Dakota
JOIN HERE
7/05/2002
22:42:04
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
Get an air-assist kit...that will work very well...go to JCWhitney.com and you can find one for your truck!
|
Iwannadrop
Dodge Dakota
JOIN HERE
7/07/2002
10:52:41
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
Hey Glenn i found some SLAM AIR AIR ADJUSTABLE SPRINGS
Towing and hauling with a lowered truck doesn't have to result in a bad ride
Springs adapt lowered truck's rear leaf suspension system to provide an adjustable spring rate for ride comfort and variable load requirements
Designed specifically for lowered trucks with 2" to 6" drop, including trucks with flipped axles and notched frames. Easy to install. Brackets included to fit Bell Tech® C-sections plus hardware and detailed instructions. Use service station air hose to inflate springs or order an on-board air supply system (sold separately). Never exceed manufacturer's recommended gross vehicle rating. Sold in pairs.
(http://jcwhitney.com/product.jhtml?CATID=165950&FID=2544&BQ=jcw2)
but couldnt find any for a dakota. If so could you tell me exactly where u found them?
THanks
|
Glenn
Dodge Dakota
JOIN HERE
7/07/2002
17:55:36
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1994&prmenbr=361
|
DakSport
Dodge Dakota
JOIN HERE
7/07/2002
21:11:49
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
Does anyone know if a c-notch would fix my problem? I believe someone once told me it would.
|
GLenn
Dodge Dakota
JOIN HERE
7/07/2002
22:16:20
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
Yes, that too would be a fix
|
DakSport
Dodge Dakota
JOIN HERE
7/07/2002
22:22:16
| RE: Will i be able to tow with a 3/5 kit?
IP: Logged
Message:
How would the ride be? My friend has a tool and die shop and has already done it to his s10 thats why i ask. Might be able to save me the money.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
