| From | Message |
Chris
Dodge Dakota
JOIN HERE
6/25/2002
15:05:36
|
 Subject: body drop
IP: Logged
Message:
anybody know about what it would cost for a stock floor body drop a extend cab dakota, i live in south georgia if anybody knows any good shops.
|
kota on 20s
GenIII
 
6/26/2002
01:02:05
| RE: body drop
IP: Logged
Message:
what do you mean a stock floor body drop? all body drops use the stock floor.
around here it is about $1000 per inch. 3-4k on average
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Etankaom
Dodge Dakota
JOIN HERE
7/03/2002
20:13:43
|  RE: body drop
IP: Logged
Message:
actually, a stock floor body drop is quite different. they do the body drop around the frame rails so it doesn't lift up the floor to your cab so u don't lose head room. stock floor bd's usually cost about 1k or higher above what a regular bd cost. ur looking at 3-4k to have it done. just make sure u get it done somewhere where the ppl know what they're doing b/c i've seen some horribly butchered bd's
|
Big O
Dodge Dakota
JOIN HERE
7/05/2002
19:12:57
| RE: body drop
IP: Logged
Message:
""actually, a stock floor body drop is quite different. they do the body drop around the frame rails so it doesn't lift up the floor to your cab so u don't lose head room""
Isn't that called chaneling?
|
Glenn
Dodge Dakota
JOIN HERE
7/05/2002
22:43:43
| RE: body drop
IP: Logged
Message:
Channeling is the same as a conventional body drop. A stock-floor body drop consists of re-working the frame to allow the body to sit lower instead of modifying the body to fit the frame.
|
kota on 20s
GenIII
7/06/2002
00:45:36
| RE: body drop
IP: Logged
Message:
that is called a "bodyless bodydrop"
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
skyler
Dodge Dakota
JOIN HERE
12/11/2002
01:47:20
| RE: body drop
IP: Logged
Message:
Stockfloor Bodydrops, well u do the front and bed traditional, u use 2x4 square tubing for the frame on the cab, and relocate your bodymounts. www.overdosecustoms.com
|
stockfloron20
Dodge Dakota
JOIN HERE
11/17/2003
00:31:47
| RE: body drop
IP: Logged
Message:
kota your an idiot its called a stock floor body drop. sectioning or "channeling" is what you do to the frame to achieve the stock floor
|
idiot ha?
Dodge Dakota
JOIN HERE
11/19/2003
00:12:25
| RE: body drop
IP: Logged
Message:
Hummm....who is the idiot that is replying to an almost year old posts?
|
dirk
Dodge Dakota
JOIN HERE
11/21/2003
22:44:04
| RE: body drop
IP: Logged
Message:
how do you drop a body, where can i get more info on getting a body drop
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
