| From | Message |
rykwan
Dodge Dakota
JOIN HERE
6/07/2002
03:55:36
|
 Subject: 3" control arms
IP: Logged
Message:
well i got some 3" control arms instead of the 3" coils that i wanted. I have heard that they don't align so what should i do. Some one help me please. i'll keep them if i can get them to align but i don't know what to if they don't
|
02dakotaRT
Dodge Dakota
JOIN HERE
6/14/2002
15:25:20
| RE: 3
IP: Logged
Message:
Hi:
Did you get them to align? If you do not want these control arms, I will buy them. "If the price is right." If you have put them on, did you have any trouble?
|
D
Dodge Dakota
JOIN HERE
6/15/2002
00:50:36
| RE: 3
IP: Logged
Message:
they will align, cept you will be left with a slight
negative camber. a litle bit of drilling and
elbow grease would allow that to be
corrected, but DJM told me it wasnt
necessary, and so far, they have been right,
no unusual tire wear or steering problems yet
(except for the increased turning radius)
|
rykwan
Dodge Dakota
JOIN HERE
6/16/2002
13:13:20
| RE: 3
IP: Logged
Message:
i got the arms on and they work great. I had no problems and they aligned. there is a slight camber but you can barley notice.
|
02dakotaRT
Dodge Dakota
JOIN HERE
6/16/2002
14:38:28
| RE: 3
IP: Logged
Message:
Thanks for the help. I am going to order my control arms on monday unless someone has some forsale cheap.
|
Joe E.
Dodge Dakota
JOIN HERE
6/17/2002
13:20:17
| RE: 3
IP: Logged
Message:
If you went with a 3in coil/3in a ram drop, what would be the total drop? 3in or more? I have lifted my truck and a arms do nothing to lift it, they just compliment the coils and keep a good ride. I have a Gen I too.
Joe E.
|
45acp
Dodge Dakota
JOIN HERE
6/17/2002
13:49:59
|  RE: 3
IP: Logged
Message:
i have a complete 3/5 drop kit from djm and shocks from doetsch tech. the control arms are 3" part # ca2397l3 rear hangar/shackle are 5" part # hs23975. the shocks are front #4039 and rear #4095
the kit was never installed. i totaled the truck 2 weeks prior to installing the kit. now i own a full size dodge. i am asking $550 for complete kit including shipping. anyone interested contact me. semper-fi-bcd@msn.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
