| From | Message |
tim
Dodge Dakota
JOIN HERE
5/01/2002
21:50:47
|
 Subject: tire clearance
IP: Logged
Message:
i have a 2000 qc with a 5.9. used belltech kit 2/4, front seemed to drop more than 2". had problems with right front tire rubbing on fender flare going over bumps. put taller bump stops in, seemed to work but notice rt. front tire wearing on outer sidewall. nebody know what size tires i should be looking to get? thanx in advance for any help you can offer. stock tire is 26.5" tall
|
kota on 20s
GenIII
5/03/2002
02:20:08
|  RE: tire clearance
IP: Logged
Message:
what size tire are you running now?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
tim
Dodge Dakota
JOIN HERE
5/03/2002
21:39:02
| RE: tire clearance
IP: Logged
Message:
the stock 15" tires. GREAT LOOKING TRUCK KOTA!!
|
D
Dodge Dakota
JOIN HERE
5/04/2002
00:44:57
| RE: tire clearance
IP: Logged
Message:
shouldnt rub...I run a 3-6 with stock 15" wheel
and tires.
http://photos.yahoo.com/bc/p0intless/lst?.dir=/
kota...I will be at irwindale on thursday may 9th
D
01/4.7/mods/djmDrop3-6
|
kota on 20s
GenIII
5/04/2002
01:11:21
| RE: tire clearance
IP: Logged
Message:
thanks tim!
D, i was there thrusday, and ill see ya there on the 9th.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
