| From | Message |
Skuba318
Dodge Dakota
JOIN HERE
4/10/2008
09:53:00
|
 Subject: 97 3.9L Suspension conversion to R/T
IP: Logged
Message:
Just wondering how one would go about equiping a 97 3.9L dakota with the lowered R/T suspension. I am pretty sure the front coil springs should be a direct fit correct? As far as the rear leaf springs wont the different size rear ends 8.25 vs 9.25 cause an issue?
I appreciate all the help and advice.
|
dont do it
Dodge Dakota
JOIN HERE
5/19/2008
02:50:50
| RE: 97 3.9L Suspension conversion to R/T
IP: Logged
Message:
the front springs for an r/t will raise your v6 truck an inch since they are made for the weight of a v8.
|
brad
Dodge Dakota
JOIN HERE
7/30/2008
00:56:22
| RE: 97 3.9L Suspension conversion to R/T
IP: Logged
Message:
Don't do it is right the springs will raise the truck some, as far as the rear all you will need for that is longer U bolts to compensate for the larger diameter. I have already done this on my truck.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
