From | Message |
intense99dak Dodge Dakota JOIN HERE
4/17/2002 21:39:06
|
Subject: 2/3 drop with 18's IP: Logged
Message: I just wanted to say that I recently added a Hotchkis suspension to my Dak along with 18x8 rims (with 5.5" of backspacing) and 255/55/18 tires. There is no rubbing on tight turns nor severe bumps. Plus with 5.5 inches of backspacing I don't need flares with these tires ... which are the same width as the stock 255/65/15.
I'll get some better pics soon, but here's a couple. And no my mind isn't made up about the running boards (which serve a very pratical purpose in protecting the sides of my Dak).
Chuck Robbins
'99 IB Dakota Sport
www.intense99dak.com
|
Glenn Dodge Dakota JOIN HERE
4/17/2002 22:44:33
| RE: 2/3 drop with 18's IP: Logged
Message: Looks pretty good....
|
BlackDakRacer Dodge Dakota JOIN HERE
4/18/2002 13:30:42
| RE: 2/3 drop with 18's IP: Logged
Message: nice job, finally bit the big one huh? jk, i remember when it was a wee little Dak on the stock rims. those the American Racing rims??
~~Eric
|
intense99dak Dodge Dakota JOIN HERE
4/18/2002 17:04:53
| RE: 2/3 drop with 18's IP: Logged
Message: Yep, they're American Racing chrome Nooze series. I bought them off eBay a while back when they were still listed as new on AR's web site. Now they don't even list them for Dakota's. I don't know if they discontinued this series for our Daks or just don't have them listed anymore.
Chuck Robbins
'99 IB Dakota Sport
www.intense99dak.com
|
BlackDakRacer Dodge Dakota JOIN HERE
4/19/2002 01:30:49
| RE: 2/3 drop with 18's IP: Logged
Message: After looking at the updated webpage i must say, PUT DOWN THE PAINT GUN CHUCK! lol jk, nice console, does it bump??
~~Eric
|
intense99dak Dodge Dakota JOIN HERE
4/19/2002 05:38:31
| RE: 2/3 drop with 18's IP: Logged
Message: I've only tested it a couple times because I still haven't completed the system (still working on the component door speakers), but yes, it definitely can bump :-) I should have the door panels/front speakers done very shortly and then it will be time to fine tune everything.
And as for the paint gun ... sorry everything was done with spray cans and no I'm not done yet either (insert wicked laugh here) :-)
Chuck Robbins
'99 IB Dakota Sport
www.intense99dak.com
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|