| From | Message |
nub
Dodge Dakota
JOIN HERE
10/12/2005
18:01:54
|
 Subject: noob in need of help
IP: Logged
Message:
i want to lower my truck as much as possible without cutting into anything. i have a 275/45/20 tire and was wondering what kit i can use without rubbing. id like to go with the best kit out there any ideas?
thanks for the help
|
nub
Dodge Dakota
JOIN HERE
10/12/2005
18:03:14
| RE: noob in need of help
IP: Logged
Message:
oh yes its a 99 3.9l club cab
|
nub
Dodge Dakota
JOIN HERE
10/15/2005
13:50:20
|  RE: noob in need of help
IP: Logged
Message:
help anyone?
|
P Y E
Dodge Dakota
JOIN HERE
10/19/2005
02:56:29
| RE: noob in need of help
IP: Logged
Message:
2 1/2" in the front, max. I have a 3 1/2" drop in the front with the same tires and I rub on every little bump.
My rear is down 5" and they are absolutley no problems.
|
nub
Dodge Dakota
JOIN HERE
10/19/2005
15:07:06
| RE: noob in need of help
IP: Logged
Message:
well i just called a guy at djm and they said it cant be done with a 2in a arm infront and a 3in block in the back. i dont understand why not there seems to be enough room for it.
should i just go with the drop
|
Dragin Dakota
Dodge Dakota
JOIN HERE
10/27/2005
17:34:34
| RE: noob in need of help
IP: Logged
Message:
cutting into anything such as things for clearance issues? in that case you can lay frame on 18's w/ 35 series tires w/o cutting any fender wells & using a bolt in notch in the rear.
otherwiese you can go with a beltech mono leaf & 2" drop spindle w/o notching the frame probably, that would bring it pretty low in the back.
but w/ those big fenderwells, they never look too low.
here's mine.
http://www.creativeconceptscc.com/Featured%20Rides/05%20GAUGEkyle3.jpg
www.CreativeConceptsCC.com ( my club's site )
|
Dragin Dakota
Dodge Dakota
JOIN HERE
10/27/2005
17:37:16
| RE: noob in need of help
IP: Logged
Message:
p.s. don't listen to sales people, they almost never know what they're talking about. i've had many people tell me that i couldn't lay frame on 20's... what a joke.
you can make anything work that you want, if you have the passion and willing to experiment.
|
nub
Dodge Dakota
JOIN HERE
12/13/2005
23:33:44
| RE: noob in need of help
IP: Logged
Message:
well i ended up dropping it 2 in front with a-arms and 3 in the back with blocks and i rub quite a bit when i turn fast other than that it looks great and rides great. im probably going to lift the back up a half inch because it still sits alittle lower in the back than the front. thanks for the help though id like to notch the frame out later on but i just wanted to try alittle something for now
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
