| From | Message |
99 R/T
Dodge Dakota
JOIN HERE
12/20/2004
10:02:12
|
 Subject: lowering springs
IP: Logged
Message:
my question is, that if I get hotchkis 2"
lowering springs (1" on RT) can I use the
stock shock length. Also does the RT use the
same shocks as any other dakota 2X4. I'm
new at this , I have a 99 R/T, thanks for the
help.
|
9RT9
Dodge Dakota
JOIN HERE
12/20/2004
14:02:39
|  RE: lowering springs
IP: Logged
Message:
I just put the hotchkis kit on my 99 R/T and I changed all four shocks to hotchkis/bilstein. I tried the stock ones for about two weeks and bottomed out going over any little bump. I had 84000 miles on my stock shocks when I put the hotchkis kit on.
|
99 R/T
Dodge Dakota
JOIN HERE
12/20/2004
16:20:04
| RE: lowering springs
IP: Logged
Message:
well. the reason I ask is that I can get a great
deal on the bilstein shocks (stock 2X4 length,
but not the lowering one's) and woundered if
they would work ok on only an inch lowering.
|
9RT9
Dodge Dakota
JOIN HERE
12/20/2004
22:19:40
| RE: lowering springs
IP: Logged
Message:
Even if you can get a good deal is it worth risking if the new shocks are for the stock height. I personally wouldn't waste the time or money getting something that isn't designed for the specific application.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
