| From | Message |
matt e
Dodge Dakota
JOIN HERE
10/14/2004
10:31:39
|
 Subject: help....4x4 lowering
IP: Logged
Message:
okay, first of i have searched. ive found good info but need a parts list.
i have a 98cc 4x4 and want it to have the stance of a rt maybee lower if possible. i know people have done it but noone has posted a parts list for it... PLEASE help me i have some 20's sittin here and theyre not on my truck cuz they look reduculous w/all that fender gap
|
dope
Dodge Dakota
JOIN HERE
10/25/2004
09:11:09
| RE: help....4x4 lowering
IP: Logged
Message:
lose the 4x4 buddy, its impossible to lower it with that. or take it to a cutom shop and have em do ur susp. s`hit up, fool.
|
TCalYen
Dodge Dakota
JOIN HERE
11/04/2004
16:05:48
| RE: help....4x4 lowering
IP: Logged
Message:
/\/\/\
STFU...!
To the thread starter. It's pretty damn easy. Use a 1, 2, or 3" block for the rear and crank down the torsion bars up front. We're talking less than $50 bucks to lower your ride. You'll need to get longer Ubolts for the rear axles because of the blocks. Don't worry about shocks yet. What till your stockers wear out and then get a set of Bilsteins or Douesch Tech's that are made for a 2wd (they're shorter). Also, you should cut the rear bump stops in half with a jig saw and maybe a little bit up front depending on how low you go. You'll be golden.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
