| From | Message |
Scottyhawaii
Dodge Dakota
JOIN HERE
9/01/2004
16:14:43
|
 Subject: Y2K front chassis messed up!!!
IP: Logged
Message:
Aloha dudes and duddettes,
I just found out that my lower front suspension is messed up!!! I tried to get my truck aligned because my passenger side tires were getting bald and the truck was pulling way too much to the right.
Any how I have a DJM Suspension drop kit 3" in the front and 4" in the back. The mechaninc showed me that my passenger wheel bearings were loose so the tire was loose on the hub. The passenger tie rod was messed up too along with the lower Moog balljoint!!!! All on the passenger side!!! Should I change both sides? driver side too? should I change the both tie rods also? both inner and outer? If thats the case what else should I do for maitenance on my truck?
Any help is appreciated.
Mahalo,
Scotty
|
Gears
Dodge Dakota
JOIN HERE
9/28/2004
14:53:55
|  RE: Y2K front chassis messed up!!!
IP: Logged
Message:
I would have to think that it would be better to replace the parts on both sides, however the cost would then double.( I needed one end link on the right and replaced both the right and left sides at the same time. thinking that wear of the bushings and such would remain closer to equal.) What does your mechanic say about it?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
