| From | Message |
Jaret
Dodge Dakota
JOIN HERE
3/26/2002
21:58:50
|
 Subject: Selling Lowering-Kit
IP: Logged
Message:
Hi, I'm selling my Western Chassis 2"/4" drop kit. Kit uses the coils for the front. For the rear the kit uses drop hangers and shackles. Comes with lowered shocks - Doetch Tech.
This kit has never been used, since I am now seling my Dak :(
All parts is included, even instructions.
I figure about $250 would do it, OBO.
you can email me at Mjaret@pacbell.net.
|
BUTTPIRATE
Dodge Dakota
JOIN HERE
3/27/2002
01:11:35
| RE: Selling Lowering-Kit
IP: Logged
Message:
DOES THE KIT INCLUDE A REAR END APPLICATOR PAD. IF SO DO YOU THINK IT WILL LOOK GOOD IN MY REAR END???????????
|
Jaret
Dodge Dakota
JOIN HERE
3/27/2002
01:23:11
| RE: Selling Lowering-Kit
IP: Logged
Message:
I think you are being sarcastic. I can't tell since i'm all grown up.
|
Dakaty
GenIII
3/27/2002
11:27:44
| RE: Selling Lowering-Kit
IP: Logged
Message:
Jaret - What model does it fit?
Do you have a part number for the kit?
|
pappie1
Dodge Dakota
JOIN HERE
3/27/2002
13:21:58
| RE: Selling Lowering-Kit
IP: Logged
Message:
would you be interested in splittin the kit? All I'm interested in is the springs
|
jaret
Dodge Dakota
JOIN HERE
3/27/2002
15:11:47
| RE: Selling Lowering-Kit
IP: Logged
Message:
sorry if i sell the springs only then i would be left with the rear parts only, which would be more dificult to sell than the whole.
it fits models 1999-2002. I bought this for a v6 club cab, so you may need to check to see if the coils are adequate for a v8 (my fear is that it does not, too much mass on those darn v8's).
|
SpeedTuba
GenIII
3/30/2002
19:42:40
| RE: Selling Lowering-Kit
IP: Logged
Message:
Is this a "complete" kit? I have a '98 Reg. Cab V6. I'm looking for a kit that has everything.
Also, is this something I can install on my own? Are jack stands sufficient? What kind of special tools might I need?
W. Patrick Jones
98 Dakota Sport 3.9L
Emerald Pearl Coat
http://www.geocities.com/wpmjones/
|
Jaret
Dodge Dakota
JOIN HERE
3/31/2002
20:08:50
| RE: Selling Lowering-Kit
IP: Logged
Message:
SpeedTuba: I believe someone has just bought my kit sorry.
But to answer your questions: I don't know you well enought to say if you have the ability to lower a vehicle. I think jack stand are sufficient for some things (sufficient for what? i don't understand what you asking). as far as special tools go, you will need a spring compressor, ball-joint fork (maybe), and all the other common tools including some type of tool to take the stock leaf spring hangers off the rear (hy. hammer, grinder, ect).
Also you may need a different kit altogether. If you read my earlier post then you would know that the kit fits only 1999-2002. It may work for a 1998 dak, but if I were you I would contact someone at DJM suspensions.
thats it, im not answering anymore emails or lame or nooby posts (no offence), as the kit has been sold.
|
pappie1
Dodge Dakota
JOIN HERE
4/02/2002
00:01:14
| RE: Selling Lowering-Kit
IP: Logged
Message:
well... that was rude all together
|
Jaret
Dodge Dakota
JOIN HERE
4/02/2002
18:01:59
| RE: Selling Lowering-Kit
IP: Logged
Message:
sorry I need to take off my engineer hat when i get home and stop being so critical, sorry.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
