| From | Message |
Bri99
Dodge Dakota
JOIN HERE
6/09/2004
00:06:14
|
 Subject: exhaust hitting when lowered?
IP: Logged
Message:
I am getting the DJM 3-5 drop and wondering about the exhaust hitting the axle or any other part? I heard about this and was wondering what to do. any help would be greaty appreciated. thanks
|
julian
Dodge Dakota
JOIN HERE
6/09/2004
10:19:05
|  RE: exhaust hitting when lowered?
IP: Logged
Message:
you shouldn't have a clearance problem as long as the pipe is higher than the bump stop above the axle. but you might want to double check just to be safe.
|
ScojoDak
Dodge Dakota
JOIN HERE
6/09/2004
15:07:10
| RE: exhaust hitting when lowered?
IP: Logged
Message:
It's going to hit sooner or later. you may have to get a turn down before the axle.
|
Matt99Dak
Dodge Dakota
JOIN HERE
6/09/2004
16:40:51
| RE: exhaust hitting when lowered?
IP: Logged
Message:
I had an aftermarket exhaust on when i got my 4" drop in the rear, and it hit the axle all the time. So i had to trash that exhaust and got a turn out in front of the axle. Just saves a lot of hassle that way too.
|
Bri99
Dodge Dakota
JOIN HERE
6/09/2004
23:27:21
| RE: exhaust hitting when lowered?
IP: Logged
Message:
thanks, that I will probalyjust get it turned out before the axle then
|
Chris
Dodge Dakota
JOIN HERE
6/11/2004
20:30:57
| RE: exhaust hitting when lowered?
IP: Logged
Message:
yeah i had the same problem with mine with a 4 inch block. it seems that the pipe is too big because the block would not fit with it being 4 inches.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
