| From | Message |
Prizefytr
Dodge Dakota
JOIN HERE
5/23/2004
15:42:04
|
 Subject: Belltech installation help
IP: Logged
Message:
Does anyone know of a good place that can install my Belltech 2/4 for a reasonably good price here in San Jose/Bay Area?? I tried Speed Merchants but those knuckeheads want to charge me $99/hr labor for five-freakin' hours! California Customs was the cheapest so far at about $395.
Help!!
|
bildo
GenIII
5/28/2004
11:00:37
|  RE: Belltech installation help
IP: Logged
Message:
Your best bet is to not do belltech. I did and the ass is so much lower that I needed to put air ride control bags in the rear. Not to mention that after a year I need to get all new shocks(went with toxic after nitros suck'd ass). Also if you still go with belltech then make sure you use that rust inhibitor form Napa that seals whatever is painted with it, mainly cause when I replaced the shocks(that were COMPLETELY shot) I noticed that the hangers were rusting like I lived in the ocean. Nasty. Rethink your options. I am changing all of mine to Hotchkis. I dont want a huge drop. I want superformance for my baby. Just be careful and If you change out the front...get ride of those control arms(you know the ones that have bad ball joints)
Good luck and do your research........
The Man
|
another mark
Dodge Dakota
JOIN HERE
5/28/2004
15:10:45
| RE: Belltech installation help
IP: Logged
Message:
Have you tried California Concepts in Redwood City? I've heard
they do hatchet jobs on installs though, never seen their work.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
