| From | Message |
TEAMFAST
Dodge Dakota
10/05/2001
22:08:20
|
 Subject: 2-4 drop
IP: Logged
Message:
I am having this installed next week on my
2001 rc 4.7 lsd,
obviously going with the coils and shackle set
up . Is there anything else ill need except
wheel alignment afterwards?
Ive heard i may need driveshaft pinion angle
work...
EXCITED TO FEEL THE HANDLING
DIFFERENCES!
|
TEAMFAST
Dodge Dakota
10/07/2001
16:24:28
| RE: 2-4 drop
IP: Logged
Message:
CAN ANYONE REFER ME TO A SITE THAT EXPLAINS THE PROCEDURE FOR THIS INSTALL, CAN I DO IT MYSELF???
|
loku
Dodge Dakota
10/07/2001
18:53:46
| RE: 2-4 drop
IP: Logged
Message:
I've got a set of instructions I've made up myself with a few pictures and some words of experience. This was for installing drop springs, shackle mounts, and hangers for a Gen II. I think it's going to be pretty close to, if not exactly the same. If you'd like, I can e-mail them to you and you can decide for yourself. Send me a reqeust at logankubik@hotmail.com.
As for your pinion angle question, I have yet to hear of anyone needing shims for dakotas. As long as you are keeping the leaf springs, you should be ok.
|
G. Cowardin
Dodge Dakota
10/09/2001
09:14:09
| RE: 2-4 drop
IP: Logged
Message:
I am wondering if getting the 1900Lb payload will raise the rear too much. What are people's experiences with the re-arched springs? I am assuming they simply re-arch the stock or add a leaf to obtain the extra rating. I will probably use the extra capacity but I am mainly getting it for the larger rear brakes. Thanks, Guys.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
