From | Message |
Slowpoke Dodge Dakota JOIN HERE
4/29/2004 23:25:39
|
Subject: Lowering?? IP: Logged
Message: I have a 92 dak sport 2wd 3.9L and i was wondering if anyone knew where i could get a lowering kit for it? i have been looking but cant find anyhting.
|
rick Dodge Dakota JOIN HERE
5/03/2004 14:40:01
| RE: Lowering?? IP: Logged
Message: you can get it through western chasis thats where i got mine i have a 1994 2wd dakota with the 3.9 to
|
chris Dodge Dakota JOIN HERE
5/08/2004 01:15:10
| RE: Lowering?? IP: Logged
Message: Question is for rick, how does your dak ride, I have a 2000 slt 2wd and was wondering about getting a western chassis kit. I was debating on just going with spindles in the front and shackles in the back though.
|
justin Dodge Dakota JOIN HERE
7/23/2004 00:35:28
| RE: Lowering?? IP: Logged
Message: any body know how to lower a 98 dakota without kit just with stock
like playing with torion bar tire rod anything
|
87DakBuilder Dodge Dakota JOIN HERE
7/30/2004 05:43:30
| RE: Lowering?? IP: Logged
Message: Chris for the Gen III daks there are no spindle options, just dropped coils and lower A arms, Login, I don't want to be rude but you can't be cheap especially when it comes to your suspension, your life depends on it. You really don't want to lower a vehicle using stock parts. You will ruin the ride quality and several other problems can occur. Get a pair of drop coils and some blocks should run you about $150, and you can use your stock shocks with a mild drop like 2/2 or 2/3. Just make sure you have the pinion angle straight as this is important to drive shaft operation.
|
justin Dodge Dakota JOIN HERE
8/01/2004 13:04:33
| RE: Lowering?? IP: Logged
Message: i have 3 inch drop blocks in the back to try to even things out but now my front sits 1 inch higher and it kills me i dont want to spend a lot of mone cause in the future i'm going to bag it i'm riding on 20inch rims with a 2 inch tire
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|