| From | Message |
Cameron
Dodge Dakota
JOIN HERE
4/21/2004
21:23:22
|
 Subject: Spindles
IP: Logged
Message:
I need some advice i am installing new drop spindles on my dakota saturday. I have never done anything with spindles before. All i have is a brief instruction paper on how to do it. Has anyone done it and didn't know how? If so please let me know if it is really difficult and how long it took you. Thanks.
|
ScojoDak
Dodge Dakota
JOIN HERE
4/22/2004
18:47:29
|  RE: Spindles
IP: Logged
Message:
what year is your truck?
|
Chris
Dodge Dakota
JOIN HERE
5/08/2004
01:18:18
| RE: Spindles
IP: Logged
Message:
I have a 2000 slt 3.9l that is 2wd, where did you get your spindles, how much did they cost, and will they work on my dak. Very interested in knowing.
|
cameron
Dodge Dakota
JOIN HERE
5/11/2004
17:30:19
|  RE: Spindles
IP: Logged
Message:
I did the spindles my self with a magazine to look at. It worked. Wasn't to bad just time consuming. MY truck is a 91. I got spindles through chassis tech. They make spindles for all dakotas good prices.
|
Chris
Dodge Dakota
JOIN HERE
5/21/2004
23:15:35
| RE: Spindles
IP: Logged
Message:
i did them on my 94, to do the spindles will take around 4 hours to do if you take your time. I would also suggest you replace your ball joints and front brakes so you don't have to do it again. I bought mine thru sport truck direct for 289 for both. A little higher for newer.
|
jay
Dodge Dakota
JOIN HERE
7/22/2004
13:51:24
| RE: Spindles
IP: Logged
Message:
are you sure they make spindles for the new dakotas because i'm almost positive that no one make spindles for the 97 up daks.
|
ScojoDak
Dodge Dakota
JOIN HERE
7/24/2004
12:48:42
| RE: Spindles
IP: Logged
Message:
Jay, you are correct. No spindles avaialable for gen III daks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
