| From | Message |
kev
Dodge Dakota
JOIN HERE
4/18/2004
23:22:47
|
 Subject: lowering?
IP: Logged
Message:
i have a 2001 r/t cc and want to drop it a just a bit as well as stiffen the suspension. i would like to go just a inch and loose the bounce in the front end in dips at high speed. any suggestions? thanks
|
R/T
Dodge Dakota
JOIN HERE
4/19/2004
11:51:57
| RE: lowering?
IP: Logged
Message:
Hotchkis all the way...
|
b1llyw
GenII
 
4/19/2004
14:51:12
| RE: lowering?
IP: Logged
Message:
Yeah, can't go wrong with a Hotchkis setup.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Neon R/T - No mods...yet
|
00R/T CC
Dodge Dakota
JOIN HERE
4/22/2004
11:14:37
| RE: lowering?
IP: Logged
Message:
kev: If you're only looking for an inch maybe springs in the front/blocks in the back? DJM 2" R/T ft.springs (CS2398RT)will give you about an inch and a third. They are stiffer by a fair bit, too.
Just a thought.
|
kev
Dodge Dakota
JOIN HERE
4/25/2004
22:23:29
| RE: lowering?
IP: Logged
Message:
thanks guys. that's some good info. i suppose i'll probably do the spings in front and blocks in back and a set of good shocks. should take care of any wavyness i might incur. thanks again.
|
00R/T CC
Dodge Dakota
JOIN HERE
4/26/2004
10:17:52
| RE: lowering?
IP: Logged
Message:
You'll probably want 2" blocks to level it out a bit. Just a thought.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
