| From | Message |
randy
Dodge Dakota
JOIN HERE
4/14/2004
01:08:16
|
 Subject: RE: i figured out how to drop a 4wd.
IP: Logged
Message:
well im planning on running 22 inch wheels im not too sure of the actual tire numbers but im going to go with the 2/4 drop to level it out again im not too sure of the numbers but i hope this doesnt make the answer too difficult
|
steveo27
Dodge Dakota
JOIN HERE
4/14/2004
18:36:54
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
ok..
how bout the stock tires on there now. it would really help if you could give me that.
|
randy
Dodge Dakota
JOIN HERE
4/17/2004
17:58:22
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
the stock tire on my dak are p265/70r16 sorry it took so long
|
steveo27
Dodge Dakota
JOIN HERE
4/17/2004
20:23:09
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
its cool, ill sit down when i get some time and try to figure this out.
|
randy
Dodge Dakota
JOIN HERE
4/19/2004
02:38:13
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
hey thanks steve-o- its no rush im not going anywhere except to buy some de-arched leaf springs and what not
|
steveo27
Dodge Dakota
JOIN HERE
4/19/2004
21:55:59
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
well, your stock tire is 265/70/16 which is roughly 30.6 x 10.4 inches. so as long as you dont go with a tire bigger than that you wont have to worry about the rear end gears and speedo calibration.
i came up with 245/45/22 which is about 30.6 x 9.64 inches. also, 255/40/22 which is about 30 x 10 inches.
best i can tell you is that. im not sure if you'll be able to find tires that size, tho.
im not sure of the back spacing, but i would buy rims with the same back spacing as the stock ones.
good luck
-steve
|
randy
Dodge Dakota
JOIN HERE
4/19/2004
23:47:23
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
hey thanks steve-o- next step is finding the money for the 22's haha
|
steveo27
Dodge Dakota
JOIN HERE
4/20/2004
21:51:48
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
haha, the best part.
good luck with it dude, and lets see some pics when its done.
steve
|
Tom
Dodge Dakota
JOIN HERE
5/01/2004
00:13:53
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
I know that all of this talk is about Dakotas but do you know if the same thing is possible on a '02 Ram (crank down the torsion bars and leafs in the back? It seems to me that the back should be no problem. I have not had any luck with the front though. Any suggestions would be greatly appreciated. Thanks
|
steveo27
Dodge Dakota
JOIN HERE
5/02/2004
17:23:52
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
tom, not sure. prolly similar would be my guess.
-steve
PS, bad news guys, i changed my mind, im not lowering the truck anymore, im gonna lift it atleast 3"s and run some 33x12x25s.
|
steveo27
Dodge Dakota
JOIN HERE
5/02/2004
17:24:28
| RE: i figured out how to drop a 4wd.
IP: Logged
Message:
tom, not sure. prolly similar would be my guess.
-steve
PS, bad news guys, i changed my mind, im not lowering the truck anymore, im gonna lift it atleast 3"s and run some 33x12x15s.
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
