| From | Message |
SSG
Dodge Dakota
JOIN HERE
3/24/2004
23:10:57
|
 Subject: help 2/4 lowering kit & "cuda" exhaust
IP: Logged
Message:
i installed the "cuda" style exhaust on my V6 dakota and now i am going to lower it with a 2/4 lowering kit from belltech. i was just looking for input & help from anyone who has done the same. will the exhaust pipes hit the axle when i hit bumps in the road or go over things like speed bumps & potholes? do i have to do modifications to the exhaust.
also has anyone installed the 2/4 belltech nitro-active lowering kit themselves? how do you like it? was it hard to install?
any input would be greatly appreciated. thanks.
SSG Greg J. Castro
US Army
gregory.castro@us.army.mil
|
SSG
Dodge Dakota
JOIN HERE
3/24/2004
23:14:33
|  RE: help 2/4 lowering kit &
IP: Logged
Message:
.
|
x96283
Dodge Dakota
JOIN HERE
3/25/2004
08:42:08
| RE: help 2/4 lowering kit &
IP: Logged
Message:
you'll want to get that exhaust as high as possible up under the bed and tucked up at the 10'clock position near the differential.
you'll need all the clearance you can get with a 4 inch drop in the rear.
www.cardomain.com/id/x96283
i think i still have a few pics up of my old cuda system and a 2-3 drop...
|
x96283
Dodge Dakota
JOIN HERE
3/25/2004
08:46:46
| RE: help 2/4 lowering kit &
IP: Logged
Message:
that should be one o'clock... it looks like it says 10 in my previous post!!
where you at?
ft sill here... :)
|
SSG
Dodge Dakota
JOIN HERE
3/25/2004
10:05:03
| RE: help 2/4 lowering kit &
IP: Logged
Message:
ft. eustis, va
thanks for the tip x96283
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
