steveo2777787
Dodge Dakota
JOIN HERE
3/14/2004
00:43:52
|
 Subject: flip kit?
IP: Logged
Message:
i want to lower my 87 4x4 to level it out, i have the front lowered about 3 inches by cranking down the torsion bars. does anyone know if i can use a flip kit and move the axle over top of the springs like the 2wds are? AIM industries sell a 5 inch flip kit for an 87 2wd to flip the axle from on top the the springs to underneath the springs to lift the the rear.
couldnt i just do this in reverse since the actual axle tube would be the same diameter and its the same principle, but in just reverse?
or does anyone know a way to do this. this way seems to be the easiest and cheapest and most effective.
thanks.
steve.
|
