Big Joe
Dodge Dakota
JOIN HERE
3/12/2004
14:47:57
|
 Subject: Need help quick!
IP: Logged
Message:
I bought a 4/5 drop kit for my Dakota R/T and now I'm thinking that it's going to be too much, even though I have seen pictures of it done on other R/Ts looking just fine.
When I measure the distance from the top of my stock height tire to the bottom of the fender flares I see about 4 inches in front and 5 inches in back. Of course this kit will only lower an R/T about 3/4.
Like I said I've seen it done on others and it looked fine, but now I'm afraid it's going to be too much. It's a Western Chassis drop kit. Can anyone tell me if one inch of clearance will be enough, or am I going to rub like crazy? Thanks!
Plus I have 20's with 255/35/20 front, and 295/40/20 rear coming too. The front should be about the same height, right? I don't know what to do!
|
