| From | Message |
chad
Dodge Dakota
JOIN HERE
3/07/2004
22:10:11
|
 Subject: drop spindles
IP: Logged
Message:
if i do a 2" drop up front on a v6 3.9 2000 will i need to do drop spindles? ive beed told i dont have to im just wondering? thanks
|
ScojoDak
Dodge Dakota
JOIN HERE
3/07/2004
22:14:40
|  RE: drop spindles
IP: Logged
Message:
They don't make spindles for gen3 (late model) daks.
|
machinist
Dodge Dakota
JOIN HERE
3/08/2004
15:39:00
| RE: drop spindles
IP: Logged
Message:
i think I am gonna start producing drop and lift spindles for Gen 3's everybody wants them!!!! I have most of the tools, and all of the knowhow!
|
mooredc
Dodge Dakota
JOIN HERE
3/09/2004
12:53:18
| RE: drop spindles
IP: Logged
Message:
Sign me up for a set.......
|
Chet
Dodge Dakota
JOIN HERE
3/09/2004
17:41:27
| RE: drop spindles
IP: Logged
Message:
You don't need drop spindles for a 2" drop. Cut 3/4 of a coil out with a cutoff wheel (NOT a torch), file the end and paint. Reinstall, and the coil will pack down. You may have to cut 1/2" from the tops of the bump stops for clearance, but the geometry is nearly identical, and you won't weird out your alignment specialist when you have to get that done. If you drop the front 2", lower the rear about 3 1/2 to 4" for a good stance with blocks. Easy, weekend work.
|
lowrt
Dodge Dakota
JOIN HERE
3/15/2004
20:42:37
| RE: drop spindles
IP: Logged
Message:
why dont you just have him lower it by releasing air out of the tires too???
damn, some people are too stupid.
|
severed
Dodge Dakota
JOIN HERE
3/23/2004
14:03:08
| RE: drop spindles
IP: Logged
Message:
You don't need no stinkin spindles I have a 4 1/2" body drop and laying on bags, and mine is perfect.
|
nocut
Dodge Dakota
JOIN HERE
3/23/2004
14:30:28
| RE: drop spindles
IP: Logged
Message:
dont cut your coils, its stupid, buy a set for under $100 and your suspension will not suck like cut coils.....Bounce...bounce....bounce.... bottom out.....bottom out.....scrape....scrape... get my point?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
