| From | Message |
Nasty Nate
Dodge Dakota
JOIN HERE
2/22/2004
01:05:14
|
 Subject: Baggin Da Front
IP: Logged
Message:
Ok, i've got something completely different from anything anyone is building i just need to know if the stock 16 inch rims w/ a low profile tire with no lowering components just bags will lay frame. Thanx for anyone who can help me. also without the lowering components could this possibly bind up my ball joints. I dont think it will just because the wheel and tire combo is so small.
|
BlackDak20
Dodge Dakota
JOIN HERE
2/26/2004
03:04:23
| RE: Baggin Da Front
IP: Logged
Message:
I have a 235/55/16 on the front with stock control arms and you will lay out on the front crossmember. I wouldnt recomend lowering components because mine was on 3" djm arms and the ball joint plate snapped on them. It is deffinately possible on the stock arms but you have to cut out some of the spring pocket. Havent had any problems with mine yet. Also with the stock amrs you dont loose turning radius. Hope that helps, later
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
