| From | Message |
DraginDakota
Dodge Dakota
JOIN HERE
2/12/2004
15:16:58
|
 Subject: Tuck 20's?
IP: Logged
Message:
Hey everybody, I've got a 97 Dakota on air ride. It lays frame now, but I'd like to put 20's on it eventually. Does anyone know what size I'd need to go with to get them to tuck? (width that is) I'll probably go w/ a 35 or 40 series tire.
If you could just tell me the width and/or offset I need to look for.
THANKS ALOT!
- Kyle, ccPresident@aol.com
or go to my club's website to see the truck.
www.CreativeConceptsCC.com
|
Tukin20S
Dodge Dakota
JOIN HERE
2/17/2004
00:08:46
|  RE: Tuck 20's?
IP: Logged
Message:
I went with 245/35/20s with mine.... Beware THEY BARely TUCK!!!!
http://www.streetsourcemag.com/viewownerprofile.aspx?profileid=18148
|
DraginDakota
Dodge Dakota
JOIN HERE
2/17/2004
10:38:35
|  RE: Tuck 20's?
IP: Logged
Message:
Thanks for the reply... Did you have to get rid of your plastic "inner fender" in front? - and what width rim did you go with? mine are 18x8 right now, i've seen 'em w/ 18x7's but i've never heard of a 20x7....
Any other Fab work to get them in the rear?
Thanks!
|
Tuckin20s
Dodge Dakota
JOIN HERE
2/19/2004
03:06:27
|  RE: Tuck 20's?
IP: Logged
Message:
I have 255/35/20 on a 98 they tuck in the front fine but im bout to sell em because the back wont tuck when i bag it this summer gettin some different 20's or 21's.
|
smartass
Dodge Dakota
JOIN HERE
2/19/2004
07:56:47
| RE: Tuck 20's?
IP: Logged
Message:
go with 14 incers, with 31 inch tires!!!! yeah man big sidewalls are sweet.
|
tim
Dodge Dakota
JOIN HERE
2/19/2004
20:45:13
| RE: Tuck 20's?
IP: Logged
Message:
i am looking to buy 20s or 18s tdwenzel@execpc.com
|
midnightdak
Dodge Dakota
JOIN HERE
2/19/2004
20:59:17
| RE: Tuck 20's?
IP: Logged
Message:
I have some 20's for sale there AR Parhania's wrapped in 255/35/20 i will sale with tires or without just make an offer cause i have to get rid of these.They have like 3000 miles on them
|
Tukin20s
Dodge Dakota
JOIN HERE
2/21/2004
14:09:10
| RE: Tuck 20's?
IP: Logged
Message:
If you want the truck to layout the crossmember... Then yes you will have to cut out the plastic piece and almost the entire fender and some supports from under the hood... Your airbox will have to go along with the windshieldwasher resevoir, and a couple computers will need to be moved.... Believe me its alot harder to tuck 20s then people think it is... But its worth it in the end!!!
http://www.streetsourcemag.com/viewownerprofile.aspx?profileid=18148
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
