| From | Message |
km
Dodge Dakota
JOIN HERE
1/15/2004
16:45:44
|
 Subject: droped conrol arms
IP: Logged
Message:
DOES ANY ONE USE DJM 3" DROP CONTROL ARMS ON THIER RIDES. I HAVE DJM 3" DROP COILS AND I HAVE NEVER LIKED THE THE WAY THE FRONT END RIDES OVER BUMPS AND CRACKS, ITS ALMOST LIKE HAVING CINDER BLOCKS FOR SPRINGS. IT CORNERS GREAT IF THE ROADS WERE SMOOTH BUT UNFORTUNETLY THIER NOT.
|
Brad
Dodge Dakota
JOIN HERE
1/15/2004
22:10:57
|  RE: droped conrol arms
IP: Logged
Message:
I have the control arms with drop shocks. Rides well. You just loose turning radius
|
km
Dodge Dakota
JOIN HERE
1/15/2004
22:15:07
| RE: droped conrol arms
IP: Logged
Message:
is this for both 2 and 3" drops? which one do u have
|
Brad
Dodge Dakota
JOIN HERE
1/16/2004
13:07:29
| RE: droped conrol arms
IP: Logged
Message:
I have the 3 inch control arms. they make 2 also. i've heard you run into turning radius problems with either. You get used to it though, not that big of a deal
|
km
Dodge Dakota
JOIN HERE
1/16/2004
21:02:36
| RE: droped conrol arms
IP: Logged
Message:
so what are you actually hitting? the spindle to the control arm. what size and back spacing are your rims. I ride on 16x8 255/50/16 i dont remember the back spacing but its not much, close to 4"
|
Brad
Dodge Dakota
JOIN HERE
1/17/2004
15:27:31
| RE: droped conrol arms
IP: Logged
Message:
My wheels are 18 * 8.5, not sure of the backspacing. They dont rub at all except if go over a dip when I'm going fast, or when I'm going fast on an on ramp to the highway. The control arms just cut out turning radius, I dont think they are hitting anything. If you go to previous posts, there's something you can do to get some of your turning radius back.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
