| From | Message |
Tank
Dodge Dakota
JOIN HERE
1/01/2004
12:29:52
|
 Subject: 93 Lowering
IP: Logged
Message:
Trying to lower my 93 Dak Sport. Extneded cab. Was just wondering if I could lower my front any other way then buying lowering spindles. I am gonna get a 3 " in the back, and 2-3" in the front. If you know of any. let me know. If you know some good sites for lowering spindles (cheap) for the front. Send them to my email
Valoriks@yahoo.com
Thanks guys!
|
janesy
Dodge Dakota
JOIN HERE
1/02/2004
12:14:59
| RE: 93 Lowering
IP: Logged
Message:
mine's lowered 2/3,using belltech 2" drop springs in the front and currently 3"block's in the rear. But i would not use blocks for the rear if you have a V8. Blocks might be ok on the newer models, but belltech advises against blocks for gen 1and 2's, because they will move around, and mine do sometimes.
Here's pics,
http://f2.pg.photos.yahoo.com/janesy01
|
Tank
Dodge Dakota
JOIN HERE
1/04/2004
01:44:19
| RE: 93 Lowering
IP: Logged
Message:
Is it worth spending the cash on a 2/3 drop? I took a look and i cant tell that much of a diffrence?
|
janesy
Dodge Dakota
JOIN HERE
1/04/2004
13:08:14
| RE: 93 Lowering
IP: Logged
Message:
i like it, because you can still drive normally. you don't ever have to worry about botoming out. plus the handling gets better as everything is stiffening up a bit. But if you want lower, than check out dome of the other guys trucks on this site, there are a good bunch of gen 2's to see around here.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
