| From | Message |
dakattack03
Dodge Dakota
JOIN HERE
12/05/2003
14:58:06
|
 Subject: belltech clunking
IP: Logged
Message:
alright guys i just got my belltech 2/4 on. man those rivits are a bitch anyway the front dropped about 2 1/16 and the back dropped about 6. so it looks a little weird to me. the tires in front are about 3/4 of an inch farther from the fender but belltech told me that after a month the coils would break in and the truck would level out if not im going to whack a coil out of those springs. well the only other problem is when i back up i get a loud clunk about 10 feet into the backup any ideas or suggestions on this or the leveling problem
|
Quicksilver
Dodge Dakota
JOIN HERE
12/05/2003
22:06:40
|  RE: belltech clunking
IP: Logged
Message:
What kind of rear set updid you use.I got a 2/3 lowering coils up front hanger an shacle in the rear.
|
Quicksilver
Dodge Dakota
JOIN HERE
12/05/2003
22:11:06
| RE: belltech clunking
IP: Logged
Message:
I've done 2 of the belltech kits.There is a break in preiod of about 200mi or so then you have too retorque the hardware.If you don't it will make some clunkin niose.I know from experience on mine.
|
dakattack03
Dodge Dakota
JOIN HERE
12/06/2003
00:28:17
| RE: belltech clunking
IP: Logged
Message:
it is the shackle and hanger kit with the toxic shocks another thing is that i have the sxt and i believe but im not sure that there are these extensions on the end of the leafsprings. the truck has been doing this since i backed it off the lift.
|
rt13
Dodge Dakota
JOIN HERE
12/06/2003
15:30:39
| RE: belltech clunking
IP: Logged
Message:
the rear dropped 6 inches? that doesnt sound right? and for the popping noise, my guess would be to check your shocks, i didnt install mine tight enough by accident, and it did the same thing.
|
dakattack03
Dodge Dakota
JOIN HERE
12/06/2003
23:07:43
| RE: belltech clunking
IP: Logged
Message:
yea i measured before and after multiple times so i know it was 6 inches but like i said i have an 03 and i was under the impression that they are a little higher in the back
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
