| From | Message |
jetski
Dodge Dakota
JOIN HERE
11/25/2003
23:00:27
|
 Subject: leveling out
IP: Logged
Message:
i bought a 2003 dakota about 6 months ago and after winter i'm going to start doing some major work, i would like to try to level out the suspension so it sits the same height in the front and back, the back sits high compared to the rest, whats the easiest way to fix this thanks in advance
|
Demon
Dodge Dakota
JOIN HERE
11/26/2003
04:51:16
|  RE: leveling out
IP: Logged
Message:
I bought a 3/4 drop kit (not yet installed). I measured from the ground to the top arch of the wheel well and was 1-1/2" higher in the back so decided on 3/4 drop. Back will be 1/2" higher after drop.
|
dude
Dodge Dakota
JOIN HERE
11/26/2003
23:04:33
| RE: leveling out
IP: Logged
Message:
the back is 2 inches higher than the front. So get a 0/2, 2/4, or 3/5 drop.
|
sniper
Dodge Dakota
JOIN HERE
11/27/2003
23:41:32
| RE: leveling out
IP: Logged
Message:
you could either put in 2inch blocks, get 2inch hangers or shackles, or pull out the bottom 2 leaf springs which is what i did. it is the cheapiest way!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
